Principle of dust removal equipment in coking plant Model of bag filter for coke oven

Coking plant dust removal equipment, coke oven bag dust collectorProduct Introduction

coking plantbag filterIt is a type of dust collector used in the domestic coke oven industry. It is a bag filter specifically designed for the coke oven industry produced by Shiheng Environmental Protection Company. It adopts the advanced working principle of non combustion coal loading method in China, and enables the collected coal loading dust to enter the dry dust removal ground station on the coke side. It is a coal loading dust removal technology. This technology has completely achieved effective capture of coal loading smoke and dust, transfer of flue gas from the coke oven roof and ground station, regulation and control of flue gas temperature, integration of flue gas purification, and the use of coke powder collected on the surface of the filter bag during the pushing process to prevent tar and water vapor in the smoke and dust from sticking to the filter bag during the coal loading process, thereby ensuring the long-term safe and stable operation of the dust collector equipment in the coking plant.

Dust removal equipment for coking plant, bag filter for coke oven, cleaning characteristics:

Bag filter for coking plantThe dust cleaning adopts low-pressure cleaning method, and the spraying program and control time of the dust removal filter bag are controlled by the electrical systemThe PLC system effectively controls and the recovered dust can be transported for takeout or taken to the material yard for disposal. The designed air volume for the dust removal system in the coking plant is 60000m3/h. While ensuring the dust removal effect and safe and reliable operation of the dust removal system, we must adjust and determine the optimal air volume based on the resistance of the dust removal system and the actual operation of the coke oven.

Working principle of coal loading and dust removal equipment in coking plant：

The flue gas generated during the coal loading process enters the dust removal pipe through the interface flap, and then mixes with the pre spray paint input from the pre spray paint bin before entering the pulse bag filter for filtration and purification. The purified flue gas is discharged into the atmosphere through the dust removal pipeline. The dust captured in the dust collector is discharged into the scraper conveyor through the pneumatic double-layer ash discharge valve, and then sent to the dust bin by the bucket elevator. The dust is then regularly loaded into vehicles and transported out of the factory by the humidification ash unloader. When the coal car opens the interface cover, it will automatically send a signal to the ground station and cause the fan to operate at high speed. After loading coal, the fan will automatically switch to low speed, and the pulse control instrument will automatically start for pulse blowback, followed by vibration and ash discharge program. For more bag filter products, please follow our website http://www.btshhb.com