Synchronous application of elevator push rod
Saide Transmission Company provides a complete set of lifting system design and system components. The system components include: elevator push rod, reduction motor, motor, commutator, transmission shaft, coupling, brake, clutch, etc. As long as the customer provides specific technical requirements for total load thrust, speed, stroke, and size requirements, the Sede transmission engineer will provide a detailed calculation process, selection of system components, and CAD assembly drawings.
Classified by screw form: trapezoidal screw type (Konfia)KA10-70）， Ball screw type, planetary ball screw type, etc.
Classified by motor type: DC motor type（12/24/36V）， AC motor type (220/380V), stepper motor type, servo motor type, etc
Classified by screw form: trapezoidal screw type (Konfia)KA10-70）， Ball screw type, planetary ball screw type, etc.
Classified by motor type: DC motor type（12/24/36V）， AC motor type (220/380V), stepper motor type, servo motor type, etc.
main purpose
Electric push rod is a universal auxiliary driving device that can be widely used in industries such as power, machinery, metallurgy, transportation, mining, petroleum, chemical, lifting, transportation, construction, and grain and feed processing. It has the characteristics of reliable performance, sensitive action, smooth operation, equal pushing and pulling force, and good environmental adaptability.
main structure
The electric push rod consists of a drive motor, reduction gear, screw, nut, guide sleeve, push rod, slide seat, spring, housing, turbine, micro control switch and other tools.
Electric push rod is a new type of electric actuator, which is mainly composed of a motor, push rod, and control device. It is a new type of linear actuator that can achieve remote control and centralized control. The electric push rod moves back and forth within a certain range of travel. Generally, the standard travel of the electric push rod is,100，150，200，250，300，350，400mm， Special itineraries can also be designed and customized according to different application requirements. Electric push rods can be designed with different thrust according to different application loads. Generally, they can reach 6000N and operate at a no-load speed of 4mm~35mm/s. The electric push rod is powered by a 24V/12V DC permanent magnet motor, which converts the motor's rotational motion into linear reciprocating motion. Drive a set of linkage mechanisms to complete the switching work of dampers, valves, gates, baffles, etc. Using an electric push rod as the actuator can not only reduce the need for air source devices and auxiliary equipment for pneumatic actuators, but also reduce the weight of the actuator. Pneumatic actuators require a certain amount of air pressure throughout the entire control operation process. Although amplifiers with low consumption can be used, over time, the air consumption is still enormous. Using an electric push rod actuator, power supply is required when changing the control opening, and power can be stopped when the desired opening is reached. Therefore, from the perspective of energy saving, electric push rod actuators have significant energy-saving advantages over pneumatic actuators. Suitable for long-distance manipulation and widely used in power, chemical, metallurgical, mining, light industry, transportation, shipbuilding and other departments for opening and closing air doors, valves, gates and other mechanisms, material loading and unloading, flow control, etc. It is now being used by more and more departments to replace automatic devices such as mechanical hands, hydraulic valves, and reduction transmission mechanisms.
