Alias: Parts cleaning machine, stepper cleaning machine, spray cleaning machine, automatic cleaning machine
Main technical parameters of the cleaning machine
1.Power supply: three-phase 380V 50HZ Control: AC 220V
2.Cleaning medium: water-based
3.Cleaning part size (width x height): 400 x 300mm
4.Loading height: 850mm
5.Conveyor belt bearing capacity: 250kg/m2
6.Conveyor speed: 0.18-1.8m/min (adjustable)
7.Cleaning line speed: within the range of 0.6-1.0m/min, adjust the speed appropriately according to the complexity factor of the parts.
8.Cleaning spray pressure: 0.32Mpa Cleaning theoretical flow rate: 25t/h
9.Rinse spray pressure: 0.32Mpa Rinse theoretical flow rate: 25t/h
10.Cleaning solution temperature: room temperature~70℃(Adjustable automatic temperature control
11.Electric heating: Cleaning solution heating power 21KW (7 KW × 3=21KW)
12.Cleaning solution, rinsing solution tank volume: 0.45m3 x 2 pieces
13.Conveyor belt drive motor power: 0.75KW
14.Cleaning pump motor power: 4KW
15.Rinse pump motor power: 4KW
16.Oil water separator motor power: 0.18KW
17.Mist suction motor power: 0.92KW
18.Dimensions (length x width x height) 2800 x 1960 x 1970 (mm)
19.Peak power: Electric heating type, approximately 31KW
20.Total weight of the machine: 2500Kg
Note: Non standard customized products can be customized according to needs!
