Advantages and Applications of Large Inclination Belt Conveyors:

Wavy side edges, cross plates, and the base belt form the conveying material structure."Valve"Container,Achieve steep angle conveying.

Drive unit: It is the power part of the conveyor systemYSeries electric motorsZJType shaft-mounted reducer, wedge-type reverse stop assembly.

Transmission Drum: The main component for power transmission; the conveyor belt operates by friction with the transmission drum; this series of drums features both rubber-coated and smooth surfaces; rubber-coated drums are designed to increase the adhesion between the drum and the conveyor belt..

Directional Drum: Used to change the running direction of the conveyor belt, directional drums are for the lower surface of the conveyor belt.

Conveyor Belt Roller: Used for changing the running direction of the conveyor belt; roller for pressing down the upper surface of the conveyor belt(Carrying surface).

Rollers: These rollers are used to support conveyor belts and the materials on them, ensuring stable operation. This series includes two types: upper parallel rollers and lower flat rollers..

Idler Rollers: Idler rollers are used to support the lower branch of the conveyor belt on the cambered frame, resting on the empty sides of the side conveyor belt flanges. Several groups of idler rollers form an arc segment to redirect the conveyor belt, and they are supported by cantilever arms.

Vertical Rollers: Vertical rollers are used to restrict the deviation of the conveyor belt.,Installed on the upper and lower transition frame mounts, each with4Each size has two up and two down..

Tapping Wheel Material Cleaning Device:Used for striking the backside of the conveyor belt,Material dislodged from the conveyor belt.

Tension device: Its functions include:1.Ensure the conveyor belt has sufficient tension,Guaranteed non-slip between conveyor belt and drive roller.2.Limit the sag between supporting rollers of the conveyor belt to ensure normal operation, this series employs a spiral tensioning device..

Rack, head funnel, head guard, feed channel, intermediate shelf, and intermediate shelf legs: These components serve as supports, dust prevention, and material guidance in the conveyor..This series of middle shelf legs come in three heights: low, medium, and high. The lower horizontal section is only compatible with the low-height middle shelf legs, while the upper and lower horizontal sections are based on different head架.(Low, Chinese, and High Headstocks)Each comes with different intermediate shelf legs(Low, Chinese, and high intermediate shelf legs).