The XY-1 drill rig is a lightweight rig with hydraulic feed. The rated drilling depth is 100 meters, and the allowable bore diameter is 1 inch.50mm, Final Hole Diameter: 60mm-110Drill depth varies according to the stratum conditions.
I. Application Scope
1. For survey exploration, geophysical exploration, road and construction exploration、Environmental testing, drilling groutingAnd drilling operations such as blast hole drilling；
2. Drilling can be performed using drill bits made of alloys, steel sand, and steel beads, etc., depending on the formation.
3. Drillable sand clay and bedrock layers from grade 2 to 9.
Can collect soil and rock core samples, or drill without coring (drilled grouting, wells, etc.), orPerform heavy-duty dynamic probing and standard penetration tests, extract undisturbed soil samples or sand samples through impact drilling。A versatile hydraulicPortable drilling rig.
II. Key Features
Equipped with an oil-pressure automatic feed mechanism, high drilling efficiency.
2. Utilizing a top ball gripper instead of a chuck allows for continuous bar feeding without machine shutdown.
Handle concentration, easy operation, and reliable safety.
4. Compact structure; drilling rigs, pumps, and diesel engines are all mounted on a single base frame, occupying minimal space.
5. Lightweight with high decomposition strength, easy to move, suitable for both plains and mountainous areas.
III. Main Parameters:
Drilling Rig Drilling Depth:100m；Final Hole Diameter:75mm; HolesDiameter:75-150 mm，Drill rod diameter：42 mm Drilling Inclination：90-75°，Drilling Machine Outline DimensionsLength, Width, Height)：1640*1030*1440mm，Drilling machine weight(Excluding the power unit): 500kg |
2. Reverser：Vertical shaft speed(Three-speed)：142,285,570 r/min，Vertical Travel ：450 mm Large spindle feed pressure：15KN，Large jib crane lifting capacity：25KN，Large upward movement speed for a stationary shaft under no load ：3m/min |
3. Hoist：LargeLifting Capacity(One-Speed Rope)：10KN，Roller Speed:55、110、220r/min，Roll diameter:145mm Roll Circle Line Speed: 0.42, 0.84, 1.68 m/s，Wire rope diameter:9.3mm, Brake Diameter: 230mm, Belt Width: 50mm |
4Pump Types: Horizontal single-cylinder double-actingLarge displacement(L/min)：Motor-equipped：77，Diesel engine equipped：95 High pressure(MPa)：1.2，Work pressure(MPa)：0.7，Bore diameter:80mm, piston stroke: 100mm |
5Oil PumpModel：YBC-20/125，Rated Pressure：12.5 Mpa，Traffic：20 ml/r，Rated Speed；1500 r/min |
6.Motor Model：Y132M-4 Rated Power ( KW)：7.5 Rated Speed (r/min)：1440 |
7Diesel Engine Model：S1100 Rated Power：12.1KW Rated Speed：2200 r/min |
Note:The standard power configuration for this drilling rig is a diesel engine. If an electric motor configuration is required,,Order requirements must be submitted by the customer at the time of ordering..
Recommended OptionalDrill Rig Base and Drilling Tower(Select an option based on your needs.：1、T-SJ-3Type triangular tripod drilling tower2、T2-SJ-3Two-wheeled trailer-mounted triangular drilling tower3、T-SJ-4Type overall base and four corner frame drilling tower.4、T4-SJ-4Type 4-wheel trailer base and corner frame drilling tower.5、LP-4T-01-AType crawler undercarriage and four-leg drilling tower.6、LP-4T-01-BType track undercarriage and four-leg drilling tower7、LP-4T-02-BType crawler undercarriageHerringbone patternHydraulic drilling derrick8、LP-4T-02--B-STRZTType caterpillar undercarriage and V-shaped full-hydraulic drilling derrick.9、LP-4T-02-B-STZDTType track undercarriage and dual tower folding hydraulic drilling derrick10、LP-4T-02-B-SSTType track undercarriage and full hydraulic telescopic drilling derrick（Highly adjustable）Note:Model Plus-SGHydraulic typeElevated Tracked Undercarriage（Automatic loading and unloading of trucks）。
