I. Application and Scope
Please provide the Chinese content to be translated.The low-concentration hydraulic pulp shredder is a primary equipment used in the papermaking industry for shredding pulp boards, paper machine waste paper, commercial waste paper, and moisture paper. It is suitable for fiber separation, pulp purification, and preliminary selection.。
The equipment boasts strong disintegration capabilities, short pulping time, ease of operation and maintenance, and only decomposition, not cutting, of the pulp material.
II. Main Technical Features
Sequential Number | Model Name | ZDS0.5 | ZDS1 | ZDS2 | ZDS3 | ZDS5 | ZDS8 | ZDS10 | ZDS15 | ZDS20 | ZDS25 |
l | Nominal Capacitym3 | 0.5 | 1 | 2 | 3 | 5 | 8 | 10 | 15 | 20 | 25 |
2 | TroughDirectDiametermm | 1000 | 1200 | 1550 | 1800 | 2200 | 2500 | 2600 | 3500 | 3800 | 4200 |
3 | Production CapacityT/D | 3-5 | 6-10 | 12-16 | 18-26 | 26-34 | 45-60 | 55-75 | 80-100 | 100-130 | 120-180 |
4 | Please provide the Chinese content you would like translated into American English.SonDiametermm | Φ360 | Φ475 | Φ500 | Φ540 | Φ700 | Φ800 | Φ900 | Φ1050 | Φ1200 | Φ1450 |
5 | RotorTranslateQuickr/min | 700 | 650 | 490 | 480 | 450 | 400 | 350 | 320 | 320 | 200 |
6 | Slurry Tube Diametermm | Φ80 | Φ100 | Φ125 | Φ150 | Φ200 | Φ200 | Φ250 | Φ250 | Φ300 | Φ350 |
7 | Inlet pipe diametermm | Φ65 | Φ50 | Φ65 | Φ65 | Φ80 | Φ80 | Φ80 | Φ80 | Φ100 | Φ100 |
8 | ChippedPulp concentration % | 2.5-6 | |||||||||
9 | PackingPlease provide the Chinese content to be translated.Motor | 11kw －6Extremely | 22kw －6Extreme | 37kw －6DExtreme | 45kw －6Extremely | 55kw －6Extremely | 75kw －6Extremely | 110kw －6Extremely | 135kw －8Extremely | 200kw －8Extremely | 200kw -8Extremely |
III. Main Structure and Working Principle
Vertical hydraulic pulp millByVertical channel, transmission mechanism, rotor, sieve plate, electric motor, etc.Please provide the Chinese content to be translated.Composition.(As shown in the figure1)
The rotor features an open turbine rotor design. It consists of a disc and blades. The disc is made of cast steel.Or stainless steel，Blade material is tool steelT9.Sheets are securely fastened to the front of the turntable shredding blades with screws and can be replaced upon wear. The front face of the rotor blades is15°The forward tilt angle, resulting in localized high flow.Leave it as is.Pulp is propelled towards the sieve plate；The steeply inclined conical and upper guide surfaces of the rotary disc, combined with the streamlined vanes, create a local vacuum between them and the sieve plate.Avoid screen hole blockage.
The clearance between the impeller and sieve plate is a factor affecting the overall performance and control of the machine, and it must be controlled during operation.3~5mmBetween the screen plate and the rotor, if the gap is worn due to abrasionIncrease, replace the sieve plate to ensure reasonable clearance.。
Screen plate material is generallyA3Steel plate, special order required1Cr18Ni9TiStainless steel sheets. Mesh specifications available.Φ5、Φ6、Φ8、Φ10、Φ12、Φ14、Φ16、Φ18、Φ20、Φ22Users can select from different types of pulp and processes as required.
