Note: Prices are subject to actual.
I-beam trolley: Available in medium, heavy, and light load types, with corresponding roller sizes of 86, 73, and 55. Load capacities are less than or equal to 50-150KG, categorized by tray layers into single, double, and triple-layer types. Each category includes an I-beam trolley that provides electrical power to crane trolleys, consisting of running wheels, brackets, and trays. The soft cable is secured to the trays and synchronized with the I-beam cable trolley by the牵引架 (traction frame), thereby achieving the purpose of cable power supply.
Detailed Description:
The I-beam trolley series includes models I, II, III, IV, and V. If the customer uses 12#, 14#, 16#, or a larger size of I-beam, please specify at the time of ordering, and our factory can supply the complete set. The GHC-III I-beam trolley is used for the movement of suspended and mobile power machinery, and has been widely applied in various industries. The device features a sturdy structure, flexible movement, and is safe and reliable.
The GHC-Ⅲ I-beam pulley is notably characterized by its high stiffness of the I-beam, strong load-bearing capacity, easy installation, and smooth operation. It also comes with an electric pulley, which maintains the same running speed as the traction equipment to minimize damage to the cables during operation. Particularly suitable for wider or heavier cables, it truly showcases its superiority.
It operates normally in indoor, outdoor, dusty, soot-covered, and environments with significant temperature differences. The TB-GZG type pulley consists of three parts: the traction pulley, cable pulley, and end pulley. The traction pulley follows the cable guide (traction) device of the moving machinery, with one for each moving machinery, operating back and forth with the machinery.
The GHC-Ⅲ I-beam pulley unit is designed for the suspension and movement of power supply cables during the movement of mechanical equipment, and has been widely used in various lifting machinery. The unit boasts a sturdy structure, flexible movement, and is safe and reliable.
The middle cable pulley suspends the cable within the I-beam track range as it moves with the traction pulley, equipped with shock absorbers at both ends. The number of pulleys varies depending on the length of movement. The terminal pulley is fixed at the end of the I-beam guide rail, usually one per moving machinery. This series of pulleys includes 6#, 8#, 10#, 12#, 14#, and 16# models. If the user opts for a larger-sized I-beam, please specify; our factory can supply a complete set.
The GHC-Ⅲ I-beam pulley consists of three parts: the traction pulley, cable pulley, and terminal pulley. The traction pulley follows the moving mechanical cable guide (traction) device, with one per moving machine, operating back and forth with the moving machinery. The intermediate cable pulley suspends the cable within the I-beam track range, moving with the traction pulley, and both ends are equipped with buffer bumpers. The number of pulleys varies depending on the length of movement. The terminal pulley is fixed at the end of the I-beam guide rail, typically one per moving machine.
Product Introduction:
The HC series cable pulley series lightweight load cable transmission pulley device is used for suspending and moving cables for power supply machinery during movement. It has been widely applied in various lifting machinery. The device features sturdy structure, flexible movement, and is safe and reliable.
The lightweight cable pulley consists of three parts: the traction pulley, cable pulley, and terminal pulley. The traction pulley follows the cable guide (traction) device of the moving machinery, with one per moving machinery, operating back and forth. The intermediate cable pulley suspends the cable within the I-beam track, moving with the traction pulley, and both ends are equipped with buffer bumpers. The number of pulleys varies depending on the movement length. The terminal pulley is fixed at the end of the I-beam guide rail, usually one per moving machinery.
This series of pulleys includes five models: I, II, III, IV, and V. If the customer opts for 12#, 14#, 16#, or a larger size of I-beam, please specify it upon ordering. Our factory can supply the complete set.
Product Description:
The HC series cable pulley is a conductive form for supplying power to the crane trolley, consisting of running wheels, brackets, and a tray. The flexible cable is secured to the tray, synchronized with the cable pulley by the traction frame, thereby achieving the purpose of powering the trolley.
The HC series cable pulleys are available in medium, heavy, and light load types, hence offering three sizes of pulley wheels: Ф80, Ф63, and Ф50. Their load-bearing capacity ranges from 50 to 150 kg. Each type is divided into single, double, and triple deck levels, with three configurations in each category. The first end is for the cable trolley, the end is for the fixed hanging bracket, and the middle is for the cable pulley.
Light Load Cable Conveying Block Instructions
Once the fixed hanging bracket is installed, a back panel should be hung behind it.
2. Adjust the tow head to ensure the cart does not碰 the upper and lower edges of the tow hole throughout its entire travel.
3. The cable length is 1.2 times the span of the crane plus 8 meters.
4. Adjust the traction wire rope to be shorter than the length of the same cable section, with the wire rope bearing the tension during operation.
5. When the cable diameters are unequal, soft rubber should be placed between the cable clamps to make their outer diameters approximately the same, facilitating the tight clamping of the cable.
6. When laying cable, ensure both sides of the cable tray are evenly supported.
7. When the cable pulley is two or three layers, the requirements are the same.
8. The double washers on the pulley assembly are adjustment washers. When the guide rail is not suitable, place the washers on the inside of the fixed plate to adjust the width of the track. The products are manufactured with guides as I 100*68*4.5, I 120*74*5, I 140*80*5, I 160*88*6 at the factory. Non-standard pulleys are processed and manufactured according to the drawings.
