Note: Prices are subject to actual conditions.
I-beam trolley: Available in medium-load, heavy-load, and light-load types, with three sizes of sliding wheels—86, 73, and 55mm—each corresponding to a load-bearing capacity of up to 50-150kg. These are categorized by tray layers into single, double, and triple-layer options. Each type includes an I-beam trolley that supplies power to crane trolleys via a conductive method. It consists of walking wheels, brackets, and trays, with the soft cable fixed to the trays and synchronized with the I-beam cable pulley by the牵引架 (traction frame), thereby achieving the purpose of cable power supply.
Detailed Description:
The I-beam trolley series includes five models: I, II, III, IV, and V. If customers use 12#, 14#, 16#, or larger size I-beams, please specify at the time of ordering, and our factory can supply the complete set. The GHC-III I-beam trolley is used for the suspension and movement of power supply equipment during movement and has been widely applied in various fields. This device features a sturdy structure, flexible movement, and is safe and reliable.
The GHC-Ⅲ I-beam pulley is notably characterized by its high rigidity of the I-beam, strong load-bearing capacity, easy installation, and smooth operation. It also comes with an electric pulley, which keeps it running at the same speed as the traction equipment, thereby reducing cable damage during operation. Particularly suitable for wider or heavier cables, it showcases its superior performance even more.
It operates normally in indoor, outdoor, dusty, greasy, and environments with significant temperature differences. The TB-GZG type pulley consists of three parts: the traction pulley, cable pulley, and end pulley. The traction pulley follows the guide cable (traction) device of the moving machinery, with one for each moving machinery, running back and forth with the machinery.
The GHC-Ⅲ I-Beam Hoist Device is used for the suspension and movement of power supply cables during the movement of mechanical power supplies. It has been widely applied in various lifting machinery. The device boasts sturdy structure, flexible movement, and reliable safety features.
The intermediate cable pulleys suspend the cables within the I-beam track range as they move with the traction pulley, with shock absorbers installed at both ends. The number of pulleys varies depending on the length of movement. The terminal pulleys are fixed at the end of the I-beam guide rail, typically one per moving mechanism. This series includes 6#, 8#, 10#, 12#, 14#, 16# models. If the user opts for a larger size of I-beam, please specify, and our factory can supply the complete set.
The GHC-Ⅲ universal beam pulley consists of three parts: the traction pulley, cable pulley, and terminal pulley. The traction pulley follows the guiding cable (traction) device of the moving machinery, with one per moving machinery, operating back and forth with the machinery. The intermediate cable pulley suspends the cable within the universal beam track, moving with the traction pulley, and both ends are equipped with shock absorber bumpers. The number of pulleys varies depending on the movement length. The terminal pulley is fixed at the end of the universal beam track, typically one per moving machinery.
Product Introduction:
The HC series cable pulley series lightweight load cable transmission pulley device is used for the suspension and movement of cables on mobile power machinery during movement, and has been widely used in various lifting machinery. The device features a sturdy structure, mobility, safety, and reliability.
The lightweight load cable pulley is composed of three parts: the traction pulley, cable pulley, and end pulley. The traction pulley follows the moving machinery's cable guide (traction) device, with one per moving machinery, operating back and forth with the machinery. The intermediate cable pulley suspends the cable within the I-beam track range, moving with the traction pulley, equipped with buffer bumpers at both ends. The number of pulleys varies depending on the movement length. The end pulley is fixed at the end of the I-beam guide rail, typically one per moving machinery.
This series of pulleys is available in five models: I, II, III, IV, and V. If the customer uses No. 12, 14, 16, or a larger size W-beam steel, please specify at the time of ordering. Our factory can supply the complete set.
Product Introduction:
The HC Series cable pulley is a conductive method for supplying power to the crane trolley. It consists of running wheels, brackets, and a tray, where the flexible cable is secured on the tray. The牵引架 (traction frame) synchronizes with the cable pulley, thereby achieving the purpose of powering the trolley.
The HC series cable pulleys are categorized into medium load, heavy load, and light load types, hence offering three sizes of pulley wheels: Φ80, Φ63, and Φ50. The load-bearing capacity ranges from 50 to 150 kg. Each type is further divided into single-layer, double-layer, and triple-layer trays, with three configurations in each category: the leading end is for cable trolleys, the terminal is for fixed hanging racks, and the middle section is for cable pulleys.
Light Load Cable Conveying Pulley Instructions
1. After the fixed hanging bracket is installed, a back panel should be hung behind it.
2. Adjust the tow head to ensure the cart does not touch the upper and lower edges of the tow hole throughout its travel.
3. Cable length is 1.2 times the crane span plus 8 meters.
4. Adjust the traction wire rope to be shorter than the length of the same section of cable, and during operation, the traction wire rope bears the load.
5. When the cable diameters are unequal, soft rubber should be used to pad between the cable clamps to make their outer diameters approximately the same, facilitating the tight clamping of the cable.
6. When laying cable, ensure the cable trays on both sides are evenly loaded.
7. When the cable pulley is two or three layers, the requirements are the same.
8. The double washers on the pulley assembly are adjustment washers. When the guide rail is not suitable, place the washers on the inside of the fixed plate to adjust the width of the rail gap. The products are manufactured with guide rails as I 100*68*4.5, I 120*74*5, I 140*80*5, and I 160*88*6 at the factory. Non-standard pulleys are processed and manufactured according to the drawings.
