CX-KZX95-I Intelligent Control Device for Switch Cabinet

I. Product Overview

The CX-KZX95-I series intelligent control device for switch cabinets is equipped with a LCD display, voice anti-error prompts, dynamic simulation diagrams, switch status, circuit breaker position, earthing blade position, spring energy storage status, high-voltage live indication, high-voltage live interlock, voltage verification and phase checking function, two-way three-phase live indication interlock, automatic or manual heating and dehumidification control, temperature and humidity value display, heater open circuit alarm, over-temperature indication, remote/local operation, cabinet lighting, human body sensing, and pre-break and pre-close flash indication, among many other features.

Section II: Technical Specifications

Working Power: AC/DC 85~265V, Power Consumption < 10W

Temperature and Humidity Control: Single or dual temperature and humidity control and display

Measurement Range: Temperature -20℃ to 100℃, Humidity 0 to 99.9% RH

Communication Interface: RS485, Modbus-RTU communication protocol, baud rate adjustable at 9600

Alarm for Disconnected Wire: When any heating element's wire is disconnected, the alarm output node closes, and the entire indicator light illuminates.

Operating Environment: Temperature -20℃ to 60℃, Relative Humidity <90%RH without condensation

Insulation Performance: Each energized part to ground, tested with an open circuit voltage tester of 500V, resistance not less than 100M.

Medium Strength: Power to Enclosure Ac2000V/1min

Section 3: Product Wiring

Four: Dimensions