Unit L is a passive device powered by the system host, with an input voltage of 24V, which is within the safe range

The unit of the l8 core wire interface adopts a T-shaped 8-core connection, and the wire is fully shielded with aluminum foil and water line, greatly reducing the interference of strong electromagnetic waves on the wire

The unit with Ethernet interface adopts Category 6A Ethernet cable, "hand-in-hand" cable connection method, with RJ45 interface and anti loosening jacket

High fidelity capacitor microphone core, sensitive pickup, clear voice, bandwidth up to 20Hz~20KHz

L adopts a die-casting multi diamond square microphone, connected to the microphone base through a fixed joint, adjustable pitch angle, and overall stability

Built in fully isolated main microphone and backup microphone, two audio signals are output simultaneously. When the system where the main microphone is located fails, it does not affect the output of the backup microphone, ensuring the smooth progress of the meeting

Adopting anti-interference circuit design, it can prevent interference from electronic products such as mobile phones

The microphone head is equipped with a speaking light ring. When the unit speaks, the light ring is always bright red, and when the unit applies to speak, the light ring is flashing red

L4.0 inch touch screen, clear display content, can display the parameters, date and time, service functions of the unit being operated, volume adjustment, language switching, brightness adjustment, background image switching, etc., to clearly understand the current usage situation

The unit is equipped with volume adjustment, which can be selected by sliding the horizontal bar to adjust the appropriate volume

The unit is equipped with brightness adjustment, which can be adjusted according to the environment by oneself

The unit comes with a built-in background selection, which can be replaced according to the existing background image settings

Microphone with speech timing function

L adopts a "hand in hand" connection method, supports hot plugging, and is convenient for installation and maintenance

The speaking unit can apply for services such as tea, paper, pen, and service personnel

The main unit has the function of approving the representative's speech application;

The main unit is not limited by the number of speakers;

The main unit has the priority function of fully controlling the order of the meeting;

The connection position of the main unit is not limited;

A system can support the simultaneous use of multiple master units.

L has its own exterior design, which is overall dignified and meets modern aesthetic standards

High fidelity capacitor microphone core, sensitive pickup, clear voice, bandwidth up to 20Hz~20KHz

Adopting anti-interference circuit design, it can prevent interference from electronic products such as mobile phones.

The microphone head is equipped with a speaking light circle, which can display the unit's speaking and closing status

The speech switch button is equipped with a transparent speech pattern, which is always on when speaking

Unit L is a passive device powered by the system host. The input voltage is 24V, which is within the safe range

The unit is connected by a 1.5M * 2M T-shaped 8-core wire and a Category 6A T-shaped network cable. The wire is fully shielded with aluminum foil and water lines, greatly reducing the interference of strong electromagnetic waves on the wire.

Equipped with audio voice control activation function, the microphone unit power automatically turns on when speaking.

L supports multiple master units, which can be installed freely without location restrictions during connection. It has the priority function of fully controlling the order of the meeting and can control the atmosphere of the meeting.

The "hand-in-hand" cable series connection mode adopts a gooseneck straw design for easy installation and maintenance.