How to choose underfloor heating for villas, townhouses, and self-built houses with large floor areas?
Installation procedure for electric underfloor heating:
Before installing electric ground-source radiant heating, test the nominal resistance and insulation resistance of the heating cable.
2. Insulation materials laid on the ground can include heat cable insulation boards. If the ground moisture is high, a layer of waterproof membrane should be laid first, followed by the insulation material.
3. Applying a layer of reflective aluminum foil over the insulating material can serve as a heat reflection.
4. A layer of metal mesh is laid over the reflective aluminum foil layer, the purpose of which is to prevent the installed thermal cable from being pressed into the insulating material and to enhance the ground's compressive strength.
5. Begin laying the heating cable segments evenly on the metal mesh from the power connection terminals, following the pre-designed layout, and tie them every 250mm. Ensure the heating cable does not cross or overlap. Then, cover and encase the heating cable with concrete, maintaining a thickness of approximately 20mm to 30mm, and finally lay tiles and other ground finishes.

Installation of electric underfloor heating:
a. Inspect the laying area to confirm it meets construction requirements.
b. Clear the laying area.
c. Install insulation layer (only on the bottom layer)
d. Install reflective layer
e. Lay steel mesh.
Install heating cables according to the design drawings.
g. Test the standard resistance and insulation resistance of the heating cable.
h. Apply cement mortar thermal mass layer as per design requirements, serve as a moisture-proof isolation layer, lay floor decorative materials, and complete the floor construction.
Install the temperature controller.

The electric floor heating market is entering a mature development phase, with heating companies growing increasingly sophisticated and robust. The floor heating market is gradually shaping into a well-established and scaled-up scenario. The rise of this heating method has added comfort, warmth, environmental friendliness, and fashion to residential spaces, gaining social recognition.

Carbon fiber electric floor heating; carbon fiber is a new material with excellent mechanical properties. Its density is less than one-fourth of steel, and the tensile strength of carbon fiber reinforced plastic composites is generally above 3500 MPa, which is 7 to 9 times that of steel. The tensile elastic modulus ranges from 230 to 430 GPa, also exceeding that of steel. The higher the specific strength of the material, the lighter the weight of the component, and the higher the specific modulus, the greater the stiffness of the component. This预示s the broad application prospects of carbon fiber in engineering.
Less is More
Comfort into life
Underfloor heating, never so simple
Haughton, let the temperature cater to you
As a pioneer manufacturer and supplier of standalone electric floor heating systems, Haohetui emphasizes health and environmental protection, craftsmanship quality, user-friendly design, and a simple, comfortable lifestyle.
Haugheitif adheres to the company's values of technology, safety, responsibility, and sustainability, seeking to provide innovative electric heating system solutions and services that purely enhance life, creating a simple, beautiful, and worry-free comfortable living space for consumers.
Over the past century, HOCHTIEF has set the gold standard for residential and commercial heating systems that adapt to the temperature for you—instead of you adapting to the temperature.