How to choose underfloor heating for villa, duplex, and self-built houses with large floor areas?
Installation Process for Electric Underfloor Heating:
Prior to installing electric radiant floor heating, test the nominal resistance and insulation resistance of the heating cable.
2. For ground installation, thermal insulation materials such as heating cable insulation boards can be used. If the ground humidity is high, lay a waterproof membrane first, followed by the insulation material.
3. Laying a reflective aluminum foil layer on the insulating material can serve as a heat reflection.
4. A layer of metal mesh is laid over the reflective aluminum foil layer, with the purpose of preventing the installed heat cable from being pressed into the insulating material and enhancing the ground's compressive strength.
5. Begin by evenly laying the heating cable segments on the metal grid from the power terminal, according to the pre-designed cable layout, and tie them every 250mm. Ensure the heating cables do not cross or overlap. Subsequently, cover and encase the heating cables with concrete (thickness approximately 20-30mm), and then lay tiles or other flooring materials.

Installation Standards for Electric Underfloor Heating
The installation process for electric underfloor heating is similar to low-temperature water underfloor heating. After the ground part of the electric underfloor heating is installed, just install a thermostat on the indoor wall. For the ground part of low-temperature water underfloor heating, a boiler and a manifold are also required.
Electric underfloor heating is also safe to use; it has been tested with 4000V high voltage. Home voltage is only around 220V, with a double-layered protection for the heating element, and it also features electromagnetic wave shielding grounding protection. In case of any leakage, the main power supply in your home will immediately shut off. The product lifespan exceeds 50 years, and electric underfloor heating has large-scale project cases in buildings across China and worldwide.
The decorative layer above the electric underfloor heating can be chosen from: tiles, marble, engineered hardwood flooring, solid hardwood flooring (self-regulating heating cables can be used for solid hardwood flooring).

Carbon Fiber Electric Floor Heating, carbon fiber is a microcrystalline graphite material obtained through carbonization and graphitization of organic fibers. The microstructure of carbon fiber is similar to artificial graphite, featuring a random layered graphite structure.

How to use electric underfloor heating:
1. Indoor temperatures should be kept within a reasonable range (16℃ to 20℃ is ideal). Setting the indoor temperature too high not only consumes a large amount of energy but also leads to a significant temperature difference between indoors and outdoors, making people feel uncomfortable and more susceptible to catching a cold.
2. In areas requiring heating, such as northern regions, it is recommended not to frequently turn the electric underfloor heating system on and off. As the indoor temperature takes time to rise, doing so not only affects the system's lifespan but also its heating efficiency. It typically takes about two to three hours to raise the temperature, during which the electricity consumption is high. Frequent on-off operation is not energy-saving.
3. Opt for intelligent control systems where possible. These systems automatically adjust room temperature based on time changes and the occupants' habits to achieve energy-saving effects. For instance, since users are typically not in the living room at night, the intelligent control system will slightly lower the temperature; similarly, during the day when users spend less time in the bedroom, the system will also slightly lower the bedroom temperature.
Why Choose Us
Ahead of the times, worthy of someone who truly understands the art of living.
If you aim for more, why settle for less? A healthy life, more than just warmth; break free from constraints, live with style.
Haughti always adheres to the spirit of "creating value." We are committed to focusing and concentrating, continuously optimizing our underfloor heating system products, adding comfort to our customers' building lives, and reducing complexity. Choosing Haughti's eco-friendly underfloor heating is not only a wise and reassuring choice but also potentially a lifelong one for our users.