Section 1:Electronic Tensile Testing MachineTechnical Specifications:

Range (0-5000N)

2: Test Accuracy ≤ 0.5%

3: Large Deformation Device Test Precision ±1mm

4: Test speed 0-500 mm/min

5: Travel Space 1200mm

6: Test Width 350mm

7: Use power supply 220V 50Hz

8: Motor Power 400W

9: Dimensions of the equipment are approximately 560×650×1700mm

10: Approx. 180 kg for the equipment

11: Metal extensometer resolution 1/1000

Metal extensometer ≤ 0.5%

13: 7-stage automatic force amplification switching

14: Force Resolution: 1/100,000

15: Displacement Resolution 1/1000

Two,Electronic Tensile Testing MachineSoftware Feature Description:

1. The computer tensile testing machine software can automatically read data such as tensile strength, yield strength, fracture strength, elastic modulus, and elongation. The formula editor can automatically calculate data results such as force, stress, displacement, and deformation at any point during the testing process. The control of the testing process and data processing comply with the national standards for metal and non-metallic materials.

2. Control Methods: options include set speed, set position, set load, set load increase rate, set stress, set stress increase rate, set strain, and set strain increase rate, etc.

3. Auto-zero: The measurement system automatically zeroes out after the test begins.

4. Automatic Gear Shift: Automatically switches to the appropriate range based on load size to ensure accuracy of measurement data.

5. Auto-saving: Test data and conditions are automatically saved to prevent data loss due to forgetting to save.

6. Batch Testing: Once set for samples with identical parameters, a batch of tests can be sequentially completed.

7. Display Method: Data and curves are dynamically displayed during the test process

8. Curve Traversal: After the test is completed, the curve can be re-analyzed using the mouse to find the corresponding data for each point on the test curve.

9. Curve Selection: Choose from stress-strain, force-displacement, force-time, displacement-time curves for display and printing

10. Unit Switch: Force Unit: (g, kg, N,), Stress Unit: (Displacement Unit: (m, mm, in))

11. Test Reports: Custom programming and printing of test reports available as per customer request, and can be exported as Excel files.

12. Safety Protection: Automatic safety protection is activated when the load exceeds 2～10% of the maximum capacity.

13. Automatically detect and calculate the mechanical property indicators of the sample, with the option for manual intervention in the analysis process. Adjust the automatic analysis results according to the requirements of relevant standards to enhance data accuracy.

Section 3:Electronic Tensile Testing MachineDetailed Specifications:

1: A set of high-precision German imported dual-function tensile-compression sensor

2: Capacity Steps: Full Range of 7 Steps: ×1, ×2, ×5, ×10, ×20, ×50, ×100

Utilizing high-precision 24-bit A/D conversion, sampling frequency of 200Hz, full-range force resolution of 1/1,000,000.

3: Power System: Panasonic Motor + Panasonic Inverter + German Ball Screw + German Linear Bearings + Korean Timing Belt/Synchronous Gear Drive

4: Control System: Utilizes PulseCommand control method for faster control, with a control range of 0~500mm/min. After testing, automatically returns to the initial position and shuts down, with automatic calculation and storage.

5: Data Transmission Method: USB Transfer

6: Display Method: LCD computer screen display for tensile testing machine software.

7: Full-range one-speed and precise full seven-speed linear dual-correcting system.

Version testing interface software allows for control modes such as setting speed, positioning, load, load increase rate, stress increase rate, and strain increase rate, plus multi-stage control modes to meet various testing requirements.

9: Test Space: Test width approximately 350 mm, stroke space approximately 1200 mm

10: Full Range Displacement: Imported encoder with 4x increased testing accuracy, featuring anti-interference capability

Safety Device: Overload automatic shutdown with electronic limit protection

12: Hand Control Method: Can be equipped with a wireless remote control device or a manual operation box

FourElectronic Tensile Testing MachineAttachment:

1: One set of operating instructions/one certificate of conformity

2: One set of test fixtures

Set of manual operation control devices

4: One set of large deformation device

1: LCD Brand Computer Set

1 Set of Color Printer/Laser Printer

7: One USB data transfer cable

1 set of software (installed on the computer)