One,Computer Tensile Testing MachineTechnical Specifications:

Range (0-5000N)

2: Test Accuracy ≤ 0.5%

3: Large deformation device testing accuracy ±1mm

4: Test Speed 0-500 mm/min

5: Traveling Space 1200mm

6: Test Width 350mm

Use power supply of 220V 50Hz

8: Motor Power 400W

9: Approx. 560×650×1700mm in size for the equipment

10: Approx. 180 kg for the equipment

11: Metal extensometer resolution 1/1000

12: Metal extensometer ≤ 0.5%

13: 7-stage Automatic Power Amplification Multiplication

14: Force Resolution: 1/100,000

15: Displacement Resolution 1/1000

Two,Computer Tensile TesterSoftware Function Introduction:

1. The computer tensile testing machine software can automatically read test data such as tensile strength, yield strength, break strength, elastic modulus, and elongation. The formula editor can automatically calculate data results such as force, stress, displacement, and deformation at any point during the test process. The control of the testing process and data processing meets the requirements of the national standards for metallic and non-metallic materials.

2. Control Methods: Selectable options include constant speed, fixed displacement, fixed load, fixed load increase rate, fixed stress, fixed stress increase rate, fixed strain, and fixed strain increase rate, etc.

3. Auto-zero: The measurement system automatically zeroes out after the test begins.

4. Automatic Gear Shift: Automatically switches to the appropriate range based on load size to ensure accuracy of measurement data.

5. Auto-Save: Test data and conditions are automatically saved to prevent data loss due to forgetting to save.

6. Batch Testing: Once set for samples with the same parameters, a series of tests can be sequentially completed in one batch.

7. Display Method: Data and curves are dynamically displayed during the test process.

8. Curve Traversal: After the test is completed, the curve can be reanalyzed using the mouse to find the corresponding data for each point on the test curve.

9. Curve Selection: Choose between stress-strain, force-displacement, force-time, and displacement-time curves for display and printing

10. Unit Conversion: Force units: (g, kg, N), Stress units: (Displacement units: m, mm, in)

11. Test Report: Programming and printing of test reports can be customized according to customer requirements, and Excel files can be exported.

12. Safety Protection: Automatic safety protection activated when the load exceeds 2-10% of the capacity.

13. Automatically detects and calculates mechanical property indicators of samples, also allows manual intervention in the analysis process, and corrects the automatic analysis results according to relevant standards to enhance data accuracy.

Section 3:Computer Tensile TesterDetailed specifications:

1: A set of high-precision German进口 dual-function tension-force sensor

2: Capacity Segments: Full Range of 7 Steps: ×1, ×2, ×5, ×10, ×20, ×50, ×100

Utilizing high-precision 24-bit A/D conversion, sampling frequency of 200Hz, full-range force resolution of 1/1,000,000.

3: Power System: Panasonic Motor + Panasonic Inverter + German Ball Screw + German Linear Bearings + Korean Timing Belt/Synchronous Gear Drive

4: Control System: Utilizes PulseCommand control method for faster control, with a control range of 0~500mm/min. Automatically returns to the initial position and shuts down after testing, with automatic calculation and storage.

Data Transmission Method: USB Transfer

6: Display Method: LCD computer screen display for tensile testing machine software.

7: Full-range one-speed and precise full seven-speed linear dual-correcting system.

Version testing interface software allows for control modes such as setting speed, positioning, load, load increase rate, stress increase rate, and strain increase rate, plus multi-stage control modes to meet various testing requirements.

9: Test Space: Test width approximately 350 mm, stroke space approximately 1200 mm

10: Full Range Displacement: Imported encoder with 4x improved testing accuracy, featuring anti-interference capability

Safety Device: Overload automatic shutdown with electronic limit protection

12: Hand Control Method: Optional wireless remote control device or manual operation box

Four,Computer Tensile TesterAttachment:

1: One user manual/one certificate of conformity

2: One set of test fixtures

Set of manual operation control devices

4: One set of large deformation device

5: LCD Brand Computer Set

6: Color/Laser Printer Set

One USB data transfer cable

8: One set of software (installed on the computer)