Darlington Transistor LC2504's Limiting Parameters (unless otherwise specified, TA=25℃):
Parameters | Symbol | Numeric | Unit |
Drive output end CE voltage | VCE | 30 | V |
Diode clamp reverse voltage | Vd | 30 | |
Input Voltage | VI | 30 | |
Collector Current (Continuous Current) | IC | 300 | mA |
Base Current (Continuous Current) | IB | 20 | |
Bonding Temperature | Tj | 150 | ℃ |
Work Environment Temperature | Topt | -20~+85 | |
Storage Temperature | Tstg | -55~+150 |
Darlington TransistorLC2504 Electrical Characteristics (unless otherwise specified, TA=25℃):
Parameters | Minimum Value | Typical Value | Maximum Value | Unit |
Input Voltage VI | 7 | 25 | V | |
Output Voltage VOUT | 4.8 | 5 | 5.2 | |
Load Adjustment Rate (R)LOAD | 0.1 | 2 | % | |
Voltage Regulation Rate PLINE | 0.5 | 2.5 | ||
Power Ripple Suppression Ratio R.R | 50 | 55 | dB | |
Input-Output Pressure DifferenceD | 1.7 | 2 | V | |
DC CurrentQ | 6 | mA | ||
CE Saturated Voltage DropC(sat) | 0.8 | 1.1 | V | |
Output Tube Collector Leakage Current IOLEAK | 1 | 10 | uA | |
Diode Forward Voltage Drop at Clamping Position | 1.5 | V | ||
Clamp Diode Leak Current IILEAK | 10 | uA | ||
Input Current II VI=5V | 1 | 2 | mA | |
Input Current II VI=12V | 3.5 | 5 | ||
Low-level Input VIH | 0.7 | V | ||
High Input LevelIL | 2 |
