A plate condenser is a new type of high-efficiency condenser made up of a series of metal plates with a certain wavy shape stacked together. The plates form thin rectangular channels between them, through which heat exchange takes place. Plate heat exchangers are ideal equipment for liquid-liquid and liquid-vapor heat exchange. They feature high heat exchange efficiency, low heat loss, compact and lightweight structure, small footprint, easy installation and cleaning, wide application, and long service life. Under the same pressure drop, their footprint is one-third of that of tube heat exchangers, and the heat recovery rate can reach over 90%.

The plate-type condenser is composed of a set of corrugated metal plates with holes for the two heat transfer fluids to pass through. The metal plates are mounted in a frame with a fixed plate and a movable clamping plate on one side, and are secured with clamping bolts. Seal washers are fitted on the plates to seal the fluid channels and guide the fluids alternately into their respective channels.

Plate Heat Exchanger Specifications:

Sheet size: 604*266*0.5

Single heat exchange area: 0.109㎡

Board spacing: 4mm

Single-channel cross-sectional area: 0.000758㎡

Flow Rate: 15-95 m³/h

Flange Diameter: 40 DN mm

Operating Temperature: ≤180°C

Work Pressure: 0.6-1.0-1.6 MPa

Bolt Hole Diameter: 50mm

Plate Heat Exchanger Advantages

High thermal efficiency, minimal heat loss.

Compact and lightweight structure, occupying minimal space.

.Easy to install and clean.

Widely applicable and long-lasting.