A plate-type condenser is a novel and efficient condenser composed of a series of metal plates with certain corrugated shapes stacked together. These plates create thin rectangular channels between them for heat exchange. Plate heat exchangers are ideal for heat exchange between liquid-liquid and liquid-vapor. They feature high heat exchange efficiency, low heat loss, compact and lightweight structure, small footprint, easy installation and cleaning, wide application, and long service life. Under the same pressure drop, the footprint is one-third of that of a tubular heat exchanger, and the heat recovery rate can reach over 90%.

The plate-type condenser is composed of a set of corrugated metal plates with holes for the two heat transfer fluids to pass through. The metal plates are mounted in a frame with a fixed plate and an adjustable clamping plate on one side, and are secured with clamping bolts. Seal washers are fitted on the plates to seal the fluid passages and guide the fluids alternately into their respective channels.

Plate Heat Exchanger Specifications:

Sheet dimensions: 604*266*0.5

Single heat exchange area: 0.109㎡

Spacing between boards: 4mm

Single-channel cross-sectional area: 0.000758㎡

Treatment Capacity: 15-95 m³/h

Flange Diameter: 40 DN mm

Operating Temperature: ≤180°C

Working Pressure: 0.6-1.0-1.6 MPa

Corner hole diameter: 50mm

Plate Heat Exchanger Advantages

High thermal efficiency, minimal heat loss.

Compact and lightweight structure; small footprint.

.Easy to install and clean.

Widely applicable and long-lasting.