Plastic-lined, pneumatic-driven diaphragm pump

Optional accessories: pH meter/thermometer/redox potential meter

Technical Specifications:

● Flange Size: DN25 - DN100 Equivalent to 1″ - 4″

● Flange Standard: DIN PN10/16 Equivalent to ANSI 150 lbs
● Standard based on EN558-1 series 1/3 equivalent to ANSI B15016.10
● Lining: PFA, PFA-AS (Anti-static)
● Eyepiece: Peng Silicate Glass

● Sampling Volume Standard: 150/250ml

Pump: PTFE, PTFE-AS (Conductive)

Operating Conditions:

Pressure: Up to 7 bar

● Temperature: -5℃ to +120℃

Feature:

Diaphragm pump, as the name implies, is a system where the fluid medium is subjected to cyclic force. The pump draws the fluid from the suction hose to the check valve and transports it from the reactor to the sight glass. The hose is connected to the top flange of the transfer pump, and the pressure-resistant hose of the pump transports the medium to the bottom flange and the immersed hose through the check valve, which is then delivered to the reactor. As an optional accessory, a pH meter can be installed on the top sensor, allowing a representative fluid sample to be conveniently extracted to a reagent bottle by shutting off the fluid from the system.