Japan Magnescale Digital Indicator LY71
High-performance display components for various measurement and control applications. With the installation of an expansion board, BCD output and comparator output can be achieved.
Various outputs can be achieved by installing an expansion board. BCD output (optional), comparator output: relay / collector open drain (optional)
Peak Hold Function for Easy Data Summarization
Various external input functions for easy automatic measurement
Small display volume toggle
Data Storage
Reset / Set to Default / Restart
Length measuring component origin detection
Set Target
Flicker Prevention
AC adapter (PSC-23A) sold separately for power supply
| Main Specifications | ||
|---|---|---|
Changes to the content will not be announced separately. | ||
| Model | LY71 | |
| Various specifications for various uses | – | |
| Number of Input Shafts | 1 to 2 shafts (2-axis addition function available. Addition results can only be displayed during addition.) | |
| Display | Show 7 digits and a minus sign, color: amber Display Window: 1-3 Axes (Unnecessary axes can be turned off. The display position of each data varies depending on the settings.) | |
| Display Data | Each shaft's Current Value / Max Value / Min Value / Peak-to-Peak Value | |
| Input Resolution |
| |
| Display Resolution | Measurement component input resolution or higher | |
| Input Signal | A/B differential (pulsed) signal (small phase difference 50ns), Z signal (compliant with EIA-422) | |
| Alarm Display | Length measuring component not connected, overspeed, exceeded large display limit, power failure, error saving data | |
| Reset | All axes reset, alarm cleared. External reset input received. | |
| Restart | Restart each shaft and the peak of all shafts | |
| Pre-set | Each shaft can save and edit up to 3 values (external preset values can be called for input) | |
| Primary Calibration Function | Reproduce the main calibration value by passing through the origin when powered on. | |
| Benchmark / Origin Function | Each axis can save and edit 1 value (when not using the main calibration feature) | |
| Maintain functionality |
| |
| Linear Compensation | Compensate the count value of the length measuring component by a certain amount. Compensation Standard: ±600um/m (Extended: ±1000um/m) | |
| Target Setting Function | 0.100000 ～ 9.999999 | |
| Input/Output |
| |
| Power Supply | DC 12V, rated 0.75A, max 1A, AC 100-240V ±10% (Please purchase a separately sold AC adapter) | |
| Power Consumption | 32VA (when using the optional AC adapter PSC-23A) | |
| Temperature Range | Operation: 0 ~ 40°C (No condensation allowed) Storage: -20 ~ 60°C (No condensation allowed) | |
| Quality | Approximately 1.5 kg | |
