Japan Magnescale Digital Indicator LH72
A high-performance display component for lathe machines, compact and versatile for various on-site applications.
Equipped with lathe functions
Small display quantity toggle
Interval Error Correction
Data Storage
Reset / Set to Default
Calibration Component Origin Detection
Programming Features
Place order
Lathe Specifications (Tool Coordinate / Accumulation Function)
AC adapter (PSC-23A) sold separately for power supply
| Main Specifications | |||
|---|---|---|---|
Changes to the recorded content will not be announced separately. | |||
| Model | LH72 | ||
| Display | Display 7 digits and negative numbers, color: amber | ||
| Connectable Length Measurement Component | GB-ER, PL20C, SJ700A (Direct Connect) / DG-B (requires additional conversion adapter) | ||
| Measurement Component Input Resolution | Standard: 0.1μm, 0.5μm, 1μm, 5μm, 10μm, 1s, 10s, 1min, 10min Expansion: 100μm, 50μm, 25μm, 20μm, 2μm, 0.05μm, with 1° adjustable | ||
| Display Resolution | Length measuring component with input resolution or higher, and its double display (except for angle display) | ||
| Input Signal | A/B phase (pulsed) signal, Z signal (compliant with EIA-422) | ||
| Small phase difference | 100ns | ||
| Quantized error | ±1 count | ||
| Alert displayed | Length measurement component not connected, overspeed, exceeded display limit, power failure, data save error | ||
| Reset | Operation via push-button switch and external reset for reset | ||
| Pre-set | Save/Access 3 Types of Values | ||
| Origin Detection Function | Align the origin of the measuring component, to reproducibly set the reference point (when connecting the measuring component with the origin) | ||
| Data Storage | Preserve display values and various settings during power outages | ||
| Linear Compensation | Compensate the counting value of the length measurement component; Compensation standard: ±600 um/m (Extended: ±1000 um/m) | ||
| Interval Error Compensation | The moving range of the component with the dot measuring length can be divided into 32 sections, each of which can be subject to error compensation. Compensation value: ±600um (per section) | ||
| Place Order | Magnification: 0.100000 ~ 9.999999 | ||
| Programming |
| ||
| Angle Display | Apply the magnetic scale to the curved surface, and enter the diameter and resolution of the magnetic scale, which will be displayed as the angle. | ||
| Sleep Mode | If there is no activity within a specified time frame, the display will disappear (the time can be set). | ||
| Display shaft | 2-axis display (2-axis or 3-axis input) | ||
| Tool Offset | 99 | ||
| Measurement Component Input Add 2 | The display supports 2-axis summation. | ||
| Display retention | Maintain display value and input tool coordinates | ||
| Power Supply | DC 12V, rated 0.75A, max 1A, AC 100-240V ±10% (when using the optional AC adapter PSC-23A) | ||
| Power Consumption | 32VA (when connected to AC power) | ||
| Operating Temperature Range | 0 ~ 40°C (No condensation allowed) | ||
| Storage Temperature Range | -20 to 60°C (No condensation allowed) | ||
| Quality | Approximately 1.5 kg | ||
