Japan Magnescale Displacement Sensor DT32N
Universal model supporting applications from assembly confirmation to dimensional measurement, etc.
While reducing costs, support multiple applications
Good environmental resistance: Equivalent to IP64 (Type P)
Measurement Range: 12mm, 32mm
Resolution: 1µm, 5µm
Accuracy: 6µm p-p, 10µm p-p (varies due to measurement length and resolution)
Support φ8mm central control tube installation and side installation via M4 screws
Oil-resistant and dust-proof performance
Available with pneumatic actuation for the main shaft, pneumatic extrusion type (available only for 32mm models. 12mm models require optional products).
| Key Specifications | |||||
|---|---|---|---|---|---|
*1 Quality refers to the value excluding the cable section Changes to the recorded content will not be announced separately. | |||||
| Model | DT32N | DT32NV | DT32P | DT32PV | |
| Spindle Drive Method | Spring Compression Type | Pneumatic extrusion | Spring Compression Type | Pneumatic Extrusion Mold | |
| Measurement Range | 32mm | ||||
| Resolution | 5μm | ||||
| Measurement Force (at 20℃) | Upward | 1.1±0.8N | 2.9N or less | 9N or lower | |
| Horizontal | 1.3±0.8N | 2.9N or less | 9N or lower | ||
| Downward | 1.5±0.8N | 2.9N or less | 9N or lower | ||
| Accuracy (at 20℃) | 10µm p-p | ||||
| Operating Temperature Range | 0 ～ 50℃ | ||||
| Storage temperature range | -10 ～ 60℃ | ||||
| Output Cable Length | 2m | ||||
| Central control pipe diameter | φ8 0‒0.015mm | ||||
| Measurement Head | Steel ball φ3mm (M2.5p x 0.45 tensioned screw) | ||||
| Quality *1 | Approximately 120g | Approximately 140g | Approximately 120g | Approx. 140g | |
| Protection Level | ― | ― | Comparable to IP64 | Equivalent to IP64 | |
