WQ Non-Clogging Sewage Pump Product Features

1. High effluent capacity, no clogging.

2. Well-designed, with a small motor power, it offers significant energy-saving effects.

3. Utilize wear-resistant mechanical seals.

4. Compact structure, easy to move, simple installation, no need for a pump house, reducing construction costs.

5. Operates over the full range of travel without overloading the motor.

6. The centerline of the inlet and outlet is aligned, allowing for direct installation at any point on the pipeline.

WQ Non-Clog Sewage Pump Main Applications

1. Industrial wastewater discharge.

2. Urban wastewater treatment plant discharge system.

3. Residential wastewater treatment stations.

4. Subway, basement, and civil air defense drainage stations.

5. Hotel and high-rise building sewage discharge.

6. Discharge of slurry in municipal engineering and construction sites.

7. Livestock farm wastewater discharge and rural farmland irrigation.

8. Self-contained water supply unit for waterworks.

9. Mine exploration and water treatment equipment sets.

10. Water supply and drainage for hydraulic engineering.

WQ Non-Clogging Sewage Pump Application Conditions

1. The medium temperature for conveyance does not exceed 80 degrees Celsius.

2. The medium's density for conveyance ranges from 1 to 1.3 Kg/dm3.

3. The pump is primarily made of cast iron and is not suitable for transporting highly corrosive liquids.

4. When the pump is in operation, the area around the pump should be well-ventilated.

5. 1Cr18Ni9Ti stainless steel material is suitable for conveying various corrosive liquids.

The significance of the WQ model for the non-clogging submersible sewage pump

40WQ15-30-2.2

40mm Bore WQ-Sewage Pump

15 - Flow (m³/h) 30 - Head (m)

2.2 - Motor Power Rating

WQ Clog-free Submersible Sewage Pump Structural Diagram

Cautionary Notes:

No dry running allowed; liquid level must not be below 3/4 of the pump height (except for internal circulation cooling pumps).

2. After installation, test the machine and pay attention to the current. If the current is too high, close the valve to control the flow rate or contact the manufacturer for measures (usually related to an excessive pump head selection margin).

3. If there's any缠绕的 aquatic vegetation or large fibers around the impeller, immediately shut down and clear it promptly.

4. When working with highly corrosive liquids, if conditions permit, shut down the pump for extended periods and lift it out of the water surface.

5. High-power submersible pumps are designed to avoid frequent startups, with a self-coupling step-down startup method that has an interval of no less than 15 minutes per startup.

6. Do not pull or tug on the cables while handling the pump.

7. Pump with oil chamber, oil change interval is every/6 months

8. Medium temperature should be <60°C.

9. For special application conditions, please communicate with our technical department to determine the selection of models, materials, and configurations.