Slanting wedge shims can be categorized by type: cast iron slanting shims, steel slanting shims, and three types of slanting shims. Among them, the cast iron slanting shims are made of cast iron.HT250Steel wedge-shaped iron plateQ235Forged from low-carbon steel or machined by skilled mechanics. The wedge-shaped iron is made of beryllium bronze.
Product Features: Slanting washer iron
1The inclined base iron does not require anchor bolts to be set for ground fixation, offering excellent vibration reduction and considerable vertical deflection, ensuring the machine tool remains stable on the ground. This saves installation costs and shortens the installation cycle. The machine tool position can be adjusted as needed for production, making it possible for overhead installation with a second installation fee. The vibration-damping base iron for machine tools can adjust the machine tool's level, with a wide range, ease of use. The vibration-damping rubber pads are made of nitrile synthetic rubber, which is resistant to oils and coolants.
2Vibration-damping rubber reduces the machine's own vibration, minimizes the transmission of vibration forces, prevents the entry of vibration forces, and ensures precision and quality in machining dimensions. Controls the propagation of vibration forces and noise in building structures. Enables the assembly of rough and fine machining machine tools into production units, adapting to the development of logistics technology.
Specification of the wedge-shaped iron:
Slanting iron pads usually do not have specific specifications; they are generally designed according to the equipment's weight and engineering drawings, and are custom-made and processed. However, common specifications include:100*50；120*60；120*80；150*80；160*80；200*100；200*120；200*150；240*120；300*150; etc.50hzThe commonly used specifications for installing the ground track with oblique shims are:100*50,120*60 150*80 180*90 200*100Several options are available, the thickness should be determined based on the guide rail height; the slope is usually excessive.3Over 10, we also customized a type for a client.150*80*30-8Required to openuMolded slots, slot width is25-30, Length is110Right there.
The accuracy of the slanting support iron:
Slanting wedge iron is generally△12.5Standard Rough Precision Sloped Wedge Iron, △6.3Medium precision angle iron, △3.2Precision Sloping Iron, △0.8For bevelled shims (milled from flat grinding). The precision of the shims chosen is determined by the degree of accuracy required for the equipment being installed. Not all bevelled shims are suitable for all equipment. They should be selected rationally according to actual needs. To achieve the optimal use of bevelled shims. Purpose of initial cost reduction.
How to use an angle iron pad?
Slanting shims are generally used in pairs. First, place a flat shim on the newly poured concrete foundation, then position the two slanting shims crosswise on top of the flat shim. Adjust by striking the two shims with a hammer, utilizing the slant of the shims to elevate or lower the equipment to achieve the desired level. Once the level is adjusted, weld the slanting shims to the bottom of the equipment to secure them firmly. Pour concrete to keep the equipment in good horizontal alignment during operation, reducing machine wear and tear. Cost of replacing equipment parts.
