TType groove bending plates are used for component inspection and fixture in mechanical processing. Used for inspecting workpieces.90°Corner gauges are used for checking the perpendicularity of related surfaces during equipment maintenance and are also commonly employed in fitter layout work. They are often utilized for inspecting, installing, and verifying the perpendicularity of machine tool faces, and can check the perpendicularity of workpieces on cast iron plates. Suitable for inspecting perpendicularity between machinery and instruments, as well as checking for non-perpendicularity between machine tools. And can be used on cast iron plates(Cast Iron Platform)Inspecting the verticality of workpieces, applicable to the execution standards for mechanical and instrument inspection, as well as the checking of non-verticality between machine tools.

TDo not use or store the type groove bending plate in damp, corrosive, excessively high or low temperature environments. Before use, perform the installation and adjustment of the bending plate, then clean the working surface of the bending plate and use it only after confirming there are no issues.

TWhat are the precautions to take when using type groove bending plates?

1Do not use or store curved plates in damp, corrosive, excessively high or low temperature environments.

2During use, perform the installation and debugging of the bending plate. Then, clean the working surface of the bending plate and use it only after confirming there are no issues.

TTechnical Parameters Introduction of Type Slot Bending Plates:TAvailable specifications for type groove bending plates主要包括200mm×300mm-2000mm×4000mm(For sizes larger than this, custom orders are available according to the provided drawings.) We will tailor different sizes of bend plates to meet the specific requirements of our customers.

TProfiled channel bending plate accuracy: Can be divided into000Grade00Grade0Grade1Grade2Grade3Select the accuracy standard based on the usage situation.3Level 5 precision and above bending plates are used for inspection, marking, assembly, etc.4Bend plates with a precision lower than grade are generally used for riveting and welding purposes.

TPurpose of Channel Bending Plate: Used for inspection, installation, and checking the vertical surfaces of machine tools, and capable of being mounted on cast iron plates.(Cast Iron Platform)Inspect the verticality of workpieces, applicable to the execution standards for mechanical and instrument inspection, as well as the non-verticality check between machine tools.