Nominal Diameter: DN15mm~DN1000mm (1/4"~40")

Nominal Pressure: PN 1.0~2.5 MPa (150~300 Lbs)

Applicable Temperature: ≤ 200℃

Material: Carbon steel, stainless steel, etc.

Medium: Coal, wastewater, sludge, refuse, pulp, slag, etc.

Widespread Applications: Mining, steel, purification equipment, papermaking, electricity, etc.

Ceramic Knife Gate Valves, also known as ceramic knife-shaped gate valves, ceramic wear-resistant knife gate valves, thin ceramic slag valves, and thin ceramic slurry valves. The closure element is a gate plate, which moves perpendicular to the fluid direction, cutting off the medium with a knife-shaped gate plate capable of cutting fibrous materials. The body of the ceramic knife gate valve does not have a chamber; the gate plate rises and falls in the side guide groove and is tightly pressed against the valve seat by a projection at the bottom. For higher medium sealing, an O-shaped ceramic sealing valve seat can be chosen for bidirectional sealing. The ultra-short structure length saves materials and reduces the overall weight of the pipeline system; occupies less effective space, effectively supporting pipeline strength, reducing pipeline vibration, and is suitable for installation at any angle on pipelines with different layouts. Specifically designed for solid-liquid two-phase flow medium pipelines, featuring a structural form designed to resist throttling erosion, to meet the dual functions of shutdown or shutdown+throttling for such medium pipelines.