DW-63CNC-2A/1S Automatic CNC Pipe Bending Machine

1. Equipment Usage:

The DW-63CNC Automatic Bending Machine is a CNC hydraulic fully automatic bending machine equipped with a full-featured device for bending three-dimensional pipe components. The entire bending process is automatically completed with input programming. The machine is characterized by easy operation, stable performance, high work efficiency, and high safety factor, making it an ideal equipment for the pipe fitting processing industry.

2. Equipment Features:

2.1 Structure Type:

1. The CNC hydraulic bending machine features a swing arm lifting type of clamp structure.

2. Utilizes a hydraulic guide plate side thrust mechanism.

3. The pipe fitting's bending direction is clockwise when viewed from above, indicating the bending direction of the pipe.

2.2 Electrical Control and Operation Interface:

1. The CNC hydraulic bending machine features a touch screen operation interface.

2. Digital display resolution: 0.01° for bend angle, 0.01° for tube rotation, 0.01mm for feeding.

3. The CNC hydraulic bending machine control system is equipped with industrial computer control.

4. Bend tube parameters are adjustable (preset) on the operating interface.

2.3 Quality Requirements for Bending Pipes:

1. The surface of the pipe at the bend must be free of wrinkles.

2. The surface of the bent tube should not have grooves or明显的dents caused by the bending process.

2.4 The CNC numerical control hydraulic bending machine equipment features the following:

1. User-friendly operation with dialog-based graphics, easy to learn and feature a clear, systematic programming input method.

2. Standard Display Text: Switch between Chinese/English. (Other text can be changed as required.)

3. The large radius bend program memory capacity is 2 million sets, with each set capable of programming up to 45 bends.

4. Directly input bending processing parameters. The machine can execute step-by-step or pause during automatic operation, allowing manual intervention for special tube bending. It can also resume automatic operation. It features a pause function and both automatic and manual modes. To start the next cycle after one cycle is completed, use the switch. Use the emergency stop button for immediate stops.