I-1B Series Thick Slurry Pump Product Overview:

The I-1B series thick slurry pump is a single-screw reciprocating pump, which utilizes the rotation of an eccentric single helical screw within a double helical sleeve to move thick slurry along the helical groove from the suction port to the discharge port, thereby achieving the pump's conveying function.

II. Key Features of I-1B Series Thick Slurry Pumps:

1. Capable of conveying high-concentration, high-viscosity suspensions up to 10,000 PaS, including those containing particulate matter.

2. Stable liquid flow without overflow, pulsation, stirring, or shearing of slurry.

3. Flow rate is independent of pressure and speed; high discharge pressure can be maintained at low flow rates.

4. Flow rate is proportional to speed; flow adjustment can be achieved through a variable speed mechanism or a speed control motor.

5. High self-priming capability; no need for a bottom valve, can directly suck liquids.

6. The pump is reversible, allowing the flow of liquid to be changed by the direction of the pump's rotation, suitable for applications requiring reverse and forward flushing of pipelines.

7. Smooth operation with minimal vibration and noise.

8. Simple structure, easy for disassembly and maintenance.

This pump is widely used in chemical, brewing, papermaking, and food industries.

Section 3: I-1B Series Thick Slurry Pumps - Structure and Material Form

I-1B Series Thick Slurry Pumps: Shell castings and drive components (main shaft, screw, and shaft-mounted) are made of 2Cr13 stainless steel, suitable for general neutral thick slurry transfer, and general acidic or alkaline slurry transfer.

I-1BF Series Thick Slurry Pumps: Both the drive components and the pump housing in contact with the slurry are made of stainless steel, suitable for conveying food, chemicals, and corrosive slurries.

Rubber bushes are available in general wear-resistant rubber, food-grade rubber, and oil-resistant rubber for customer selection.

Transmission methods include direct drive from the motor to the pump shaft, motor through a reducer to the pump, and motor through a V-belt pulley to the pump shaft.

Available electric motors include general enclosed type, explosion-proof type, and electromagnetic speed control motors, along with stepless speed changers and gear reducers for customer selection.

IV. I-1B Series Thick Slurry Pumps Technical Specifications:

Flow rate: 1.5-38 m³/h

Flow Range: 0-180m

Power: 1.1-15 kW

Speed: 960 rpm

Temperature: 0-100℃

Bore Size: 25-150mm