How much are the Babjehec gas boilers in Wujiaqu, natural gas boilers?
Cleaning of Gas Boilers
Boilers, after prolonged operation, inevitably develop issues like scale and rust. The primary cause of scale formation in boilers is the hardness components present in the feedwater. Upon continuous evaporation and concentration under high temperatures and pressures, a series of physical and chemical reactions occur within the boiler, ultimately leading to the formation of hard, dense scale on the heat-exchange surfaces. This reduces heat exchange efficiency and, due to under-scaled corrosion, decreases the boiler's cooling wall heat absorption, increasing the outlet temperature of the furnace and causing increased boiler losses. Additionally, scale buildup inside the water-cooled walls reduces heat transfer efficiency, potentially leading to increased wall temperatures and wall破裂, affecting the boiler's safe operation. Scale is the "root of all evils" for boilers, being a major cause of boiler accidents. Its harmfulness mainly manifests as waste of a significant amount of fuel. Since the thermal conductivity of scale is only a fraction of that of steel, the heat transfer is impeded when scale forms on the heat-exchange surfaces. To maintain a certain output of the boiler, the fire side temperature must be increased, which leads to radiant and flue gas losses. Now, efficient, environmentally friendly, and non-corrosive cleaning agents can be used to clean gas boilers, revealing the original metallic color of the equipment's tubes, reducing the impact of scale and biological algae sludge. It also has the effect of stripping iron oxide and sub-oxide, which can extend the service life of gas boilers, reduce energy consumption, and increase productivity. [2]
Heze Boiler FactoryThe YY(Q)W type gas conduction oil furnace produced by our company is a new type of special boiler with low pressure and high-temperature operating characteristics. Its heating temperature can reach up to 340℃ in the liquid phase or 400℃ in the vapor phase. It can serve as a high-temperature heat source for various applications below 350℃ and is widely used in various industries that require high-temperature heating or drying. It features high temperature, low pressure, precise temperature control, and high energy utilization. An optional steam generator can also be fitted to produce saturated steam below 1.3MPa for the user's needs. Organic heat carriers can be used for heating in any production scenario that requires uniform and stable heating between 150℃ and 380℃ where direct flame heating is not permitted.。This gas-fired organic heat carrier boiler typically uses oil or gas as fuel, with thermal oil as the medium. It employs a thermal oil circulation pump to force the medium into a liquid-phase cycle, transferring heat to the heating equipment before returning to the boiler for reheating. It boasts high working temperatures at low pressures and allows for high-precision control of the medium's operation. The system has high thermal efficiency, easy operation and maintenance, and is an ideal, safe, efficient, and energy-saving heating equipment of choice.。
Primary Application:
Chemical Industry - Edible Oil Chemicals, Polymer Industry, Reactor Vessels, Distillation, Concentration. Plastic Industry - Plastic Blowing, Extrusion Molding.
Textile Industry - Resin setting machines, dyeing machines, drying chambers, high-temperature machines, roller machines. Rubber Industry - Vulcanization heating for rubber.
Food Industry - Steaming, drying, and vegetable oil extraction. Forest Product Industry - Heating and shaping of plywood, MDF, and particleboard.
Paper Products Industry - Multi-layer cardboard for packaging boxes, drying, dehydration. Other - Heating of metal electroplating tanks, curing of coatings, drying, pharmaceutical industry distillation, reduction, concentration, dehydration, etc.
Key Features:
The product's design, manufacturing, and inspection are strictly conducted in accordance with the "Safety Supervision Regulations for Organic Heat Carrier Boilers," the "Safety Supervision Regulations for Hot Water Boilers," GB/T17410-1998 "Organic Heat Carrier Boilers" standard, and procedures. It has also been inspected by the national special equipment safety supervision authority, ensuring safety and reliability.
2. The boiler heating surface is焊接with argon gas shielded full penetration welding, and has passed X-ray inspection and hydrostatic pressure testing to ensure the welding quality exceeds national standards.
3. The diameter and length of the radiation coil are perfectly matched to the flame of the compatible burner to ensure reliable operation and adequate cooling of the coil.
4. The heat exchange surface uses a higher, yet reasonable, gas velocity based on rigorous calculations to ensure sufficient heat exchange within the furnace, guaranteeing a high thermal efficiency of the boiler system.
5. The boiler body features a rational structural design and high-quality refractory and thermal insulation materials, resulting in an external surface temperature of ≤50℃ for the boiler, exceeding the national standard requirements.
6. The boiler main body is fully assembled for factory shipment, allowing for the installation of the combustion system, piping system, and electrical control system upon arrival at the customer's site. It boasts the significant feature of a relatively short installation period and low costs.
7. Utilizing internationally renowned brand burners, reliable quality guaranteed, trustworthy.
Safety protection features and main control points:
Thermal oil export temperature display: Can be displayed on-site and remotely transmitted to the control cabinet for meter display. Users can set this temperature value, and it can be interlocked with the induced draft fan to achieve automatic adjustment of operation, and high-temperature alarm.
2. Thermal oil import temperature display: Can be displayed on-site and remotely transmitted to the control cabinet for instrument display.
3. Export Pressure Display for Thermal Conductive Oil: Available for on-site display and remote transmission to the control cabinet for meter display, with overpressure alarm function.
4. Thermal oil import pressure display: Can be locally displayed and remotely transmitted to the control cabinet for instrument display.
5. Expansion Tank Level Control: Achieves low-level liquid alarm in the expansion tank, promptly reminding the boiler operator to inject oil into the system, ensuring the safe and reliable operation of the boiler system.
