Shandong Zhongjie Special Equipment (formerly Heze Boiler Factory Co., Ltd.) was established in 2001, located at No. 2218 Jinan Road, Development Zone, Heze City. With a registered capital of 50 million yuan and total assets of 500 million yuan, the company has seven business centers: boiler, deep-freeze containers, pressure vessels, central air conditioning, engineering installation, international trade, and Internet of Things. It has three factory areas on Jinan Road, East Yangtze Road, and Bohai Road, covering a total of 200,000 square meters. The main workshop is 83,000 square meters. There are currently 710 employees, including 247 engineers and technicians, and 82 intermediate-level technicians. In December 2016, it was recognized as a "High-Tech Enterprise" by the Science and Technology Department. In June 2021, it was identified as a "Specialized and New Enterprise in Shandong Province" by the Ministry of Industry and Information Technology. In June 2022, it was recognized as a "Gazelle Enterprise in Shandong Province" and in August 2022, it was identified as a "Specialized and New Small Giant Enterprise" by the Ministry of Industry and Information Technology.
Yes, the biomass boiler market is expected to continue expanding. The following are some factors driving the growth of the biomass boiler market:
Rising Demand for Renewable Energy: As the demand for renewable energy continues to grow, biomass, as a renewable energy source, holds broad application prospects. Government and corporate support and promotion of renewable energy will facilitate the expansion of the biomass boiler market.
Environmental Awareness Rising: Biomass boilers have lower carbon emissions and environmental impact compared to traditional fossil fuel boilers. As environmental awareness increases, more and more users are opting for biomass boilers to reduce environmental impact.
Policy Support: Many regions have implemented policies and measures to support the development of renewable energy, including tax incentives and energy regulations. These policies will drive the growth of the biomass boiler market.
Energy Security Needs: Biomass, as a native renewable energy source, can reduce dependence on imported energy and enhance energy security. In areas with scarce resources, the demand for biomass boilers will be even more pronounced.
Technological advancement and cost reduction: With continuous technological progress and reduced costs, biomass boilers have seen improved performance and efficiency, making them more competitive and viable.
In summary, the biomass boiler market is expected to expand continuously, driven by factors such as increasing demand for renewable energy, rising environmental awareness, policy support, energy security needs, and technological advancements with cost reductions.

The extinguishing process and maintenance methods for fully automatic biomass boilers are as follows:
Extinguishing Process:
Discontinue Fuel Supply: Prior to extinguishing the biomass boiler, first discontinue the fuel supply and ensure the fuel supply pipeline is closed.
Turn off the burner: Switch the burner's switch or the extinguish button on the control panel to the off position to stop the burner from operating.
Wait for Cooling: Allow the boiler to cool down to a safe temperature, which usually takes some time. Do not operate during this period to prevent any accidents.
Shut off power: After the boiler has completely cooled down, turn off the power switch of the boiler to ensure the boiler is in a power-off state.
Maintenance Instructions:
Clean combustion chamber: Regularly clean the combustion chamber to remove ash and soot produced during the burning process. Use appropriate tools and cleaning agents for cleaning to ensure the chamber remains clear and clean.
Heat Exchanger Cleaning: Regularly clean the heat exchanger, particularly the flue side. Combustion may produce particles and slag in the flue gas, which can adhere to the heat exchanger surface, affecting thermal transfer efficiency. Employing appropriate cleaning methods, such as mechanical or chemical cleaning, can help reduce the buildup of dirt.
Inspect and Replace Critical Components: Regularly inspect and replace critical components such as burners, valves, sensors, etc. Ensure their proper operation and performance to avoid malfunctions and safety hazards.
Water Treatment: Proper water treatment for boiler feed water to prevent impurities and sediments from settling inside the boiler. Methods such as water softening, deoxygenation, and scaling removal can be employed to maintain the cleanliness and stability of the water supply.
Regular Maintenance: Conduct regular maintenance and upkeep, including inspecting and cleaning the control system, checking electrical connections, and lubricating moving parts. Develop a corresponding maintenance schedule based on the boiler's usage and the manufacturer's recommendations.
Above is the extinguishing process and maintenance methods for the fully automatic biomass boiler. Through proper operation and regular maintenance, it ensures the safe operation of the boiler and prolongs its service life.

When using biomass boilers, here are some common usage methods and precautions:
Operation Manual: First, carefully read and understand the biomass boiler's operation manual. The manual will provide detailed instructions and guidance on safe operation, ignition, fuel supply, and combustion adjustment.
Fuel Selection: Choose appropriate biomass fuel such as wood chips, straw, wheat straw, fruit shells, etc. Ensure the fuel quality is good, dry, and free of impurities to guarantee effective combustion and normal boiler operation.
Ignition Procedure: Follow the instructions in the operation manual for ignition. Typically, you need to activate the igniter or ignition device, ensure an adequate fuel supply, and adhere to safety operating procedures.
Combustion Adjustment: Adjust combustion parameters such as fuel supply, oxygen supply, and combustion temperature based on the boiler's operating status and requirements. Adjustments can be made according to the instructions in the operation manual, using the control panel or an automated control system.
Cleaning and Maintenance: Regularly clean and maintain biomass boilers, including the combustion chamber, flue, and heat exchanger components. Ensure the boiler's combustion efficiency and safety.
Safety Precautions: When using biomass boilers, please pay attention to the following safety measures: Ensure good ventilation around the boiler to prevent smoke accumulation from combustion; Regularly inspect and replace critical components such as burners and valves; Adhere to the safety operation procedures in the manual to avoid accidents caused by operational errors.
Please note that the above information is for general usage methods and precautions only; specific usage methods and operational details may vary depending on different biomass boiler models and manufacturers. Therefore, it is recommended to thoroughly read and follow the operation manual and guidelines provided by the manufacturer before using a biomass boiler.

The YGL series organic heat carrier boiler is a boiler equipment that utilizes organic heat carriers to transfer heat. Its main components and characteristics are as follows:
Composition:
Furnace Body: The furnace body is the main part of the organic heat carrier furnace, including the furnace chamber, combustion chamber, and flue, etc. Made of steel, it boasts excellent high-temperature resistance.
Combustion System: The combustion system includes burners, combustion fans, and combustion control systems, etc. The burners are responsible for injecting fuel into the furnace for combustion, the combustion fans supply the oxygen required for combustion, and the combustion control system achieves automatic control of the combustion process.
Heat Exchange System: The heat exchange system includes heat carrier circulating pumps, heat carrier heaters, and heat carrier coolers. The heat carrier circulating pump is responsible for circulating the heat carrier to the heater, where it is heated before returning to the furnace to transfer heat energy. The heat carrier cooler is used to cool the heat carrier to ensure the stability of the heat carrier circulation.
Control Systems: The control system encompasses temperature controllers, pressure controllers, and safety protection devices, etc. The temperature controller is used for monitoring and adjusting the furnace temperature, the pressure controller is for monitoring and adjusting the pressure of the heat carrier, and the safety protection devices ensure the safe operation of the furnace and heat exchange system.
Features:
High thermal efficiency: The YGL series organic heat carrier boilers use organic heat carriers as the heat transfer medium, offering a high heat transfer efficiency. The organic heat carrier can achieve liquid phase heat transfer at low temperatures, resulting in minimal heat loss and enabling a more efficient use of fuel.
Our company attaches great importance to technological innovation and R&D design. We have 1 municipal-level enterprise technology center in Heze City, with testing facilities for non-destructive testing, physical and chemical tests, welding tests, hydrostatic tests, etc. We are equipped with over 600 types of equipment, including CNC machine tools, X-ray flaw detectors, digital ultrasonic flaw detectors, mechanical property testing machines, chemical analyzers, spectrometers, tensile testing machines, plasma welding machines, and more. The key products and technologies we have developed, such as welding for temperature and pressure vessels, emission reduction of biomass boilers, and waste heat recovery, have successively been selected for multiple Shandong Provincial Department of Industry and Information Technology science and technology innovation projects, Shandong Provincial key projects, and Heze City innovation and excellence projects. We have累计 obtained 27 authorized utility model patents, 16 authorized invention patents, participated in drafting 2 standards, 2 industry standards, and registered 15 trademarks. Our technical team, in collaboration with Professor Yajiang Li from Shandong University, has developed deep cryogenic container processing technology using the internationally recognized plasma arc + wire filling argon arc welding (PAW-GTAW) technology. The provincial-level scientific and technological achievement appraisal has confirmed that our technology level in the field of deep cryogenic container manufacturing has reached international standards. Choose Zhongjietech, let's create brilliance together!