JY-SN96Delayed Coking Defoamer

JY-SN96 Defoamer for delayed coking

1. Product Description  Product description

JY-SN96A bulk defoamer prepared from various polyether alcohols, silicone oils, and other low surface active agents through advanced technology. It boasts excellent stability under extreme high temperatures, effectively controlling the foam height in delayed coking processes while enhancing equipment utilization without compromising the quality of the oil produced. Compared to similar products, this product exhibits strong defoaming and antifoaming properties.

JY-SN96 is a bulk defoamer prepared from a variety of polyether alcohols, silicone grease and other low surface active substances through advanced technology. This defoamer has excellent stability under extreme high temperatures and can well control the foam height in the delayed coking process while improving equipment utilization without affecting the quality of the output oil. Compared with similar products, this product has strong defoaming and anti-foaming properties.

2. Features include:  Features

Excellent high-temperature stability, suitable for high-temperature systems 

Good high temperature stability, suitable for high temperature systems

Quick defoaming, long-lasting foam inhibition

Eliminate foam quickly and suppress foam for a long time

Low-silicon products, without affecting the output oil quality

Low silicon product, does not affect oil production

3. Physical Data Physical property data

Appearance: Light yellow transparent liquid  Appearance: light yellow transparent liquid

Density:Density

Viscosity: Viscosity

pHPlease provide the Chinese content to be translated.: pH value

Effective Material Content: Effective substance content

4. Usage Instructions Instructions

It can be used directly or diluted, and it is recommended to add continuously using a metering pump. Generally speaking, the suggested amount is:0.01~0.3%Effectively eliminates and prevents the reformation of foam; the specific amount to be added should be determined through on-site adjustment.

It can be used directly or after dilution. It is recommended to use a metering pump for continuous addition. Generally speaking, it is recommended that the addition amount is 0.01~0.3% to effectively eliminate and prevent the regeneration of foam. The specific addition amount should be determined through on-site debugging.

5. Packaging, Storage, and Precautions Packaging & storage and precautions

Adopted25kg、200kg、1000kgPackaging or negotiate packaging; store in a sealed, light-proof container at room temperature, avoiding long-term exposure to extreme cold or heat; product shelf life is1Year.

Packed in 25kg, 200kg, 1000kg or as request 

Sealed and stored at room temperature away from light to avoid long-term exposure to extreme hot and cold environments.

Warranty: 1 year.