Epoxy Pad Product Introduction

Epoxy pads are made from electrical-grade epoxy phenolic layered glass cloth boards, processed physically. They possess high mechanical and dielectric properties, heat resistance, and are suitable for insulation in slots of motors, transformers, ballasts, etc., with equal spacing. They are manufactured from epoxy boards.

Technical Specifications:

Density 1.8 g/cm³
Wicking Rate 0.072%
Surface withstand voltage 12kV, 1min, no puncture, no flashover
Bend Strength ≥ 700 MPa
Thermal stability: Does not separate or crack at 200°C for 24 hours.
Flame Retardancy Cigarette Ignition Test 960℃/30±1s
Insulated Resistance, Electrode Spacing 10mm, 8TΩ
Absorbed Energy at Impact: 1.29J
Grade: F-Level

Technical Requirements: Surface should be smooth, work surfaces should be straight, free of cracks and burn marks, and internally should not have layered cracks.