Shandong Zhongjie Special Equipment Co., Ltd. (formerly Heze Boiler Factory Co., Ltd.) was established in 2001, located at No. 2218 Jinnan Road, Economic and Technological Development Zone, Heze City, with a registered capital of 50 million yuan and total assets of 500 million yuan. The company has 7 business centers: boilers, deep-freeze containers, pressure vessels, central air conditioning, engineering installation, international trade, and the Internet of Things. It has three factory areas on Jinnan Road, East Changjiang Road, and Bohai Road, covering a total area of 200,000 square meters, with the main workshop area of 83,000 square meters. Currently, there are 710 employees, including 247 engineering and technical personnel and 82 intermediate-level technicians. In December 2016, it was recognized as a "High-Tech Enterprise" by the Science and Technology Department. In June 2021, it was identified as a "Specialized and New Enterprise in Shandong Province" by the Department of Industry and Information Technology. In June 2022, it was recognized as a "Gazelle Enterprise in Shandong Province" and in August 2022, as a "Specialized and New Small Giant Enterprise" by the Ministry of Industry and Information Technology.
In textile processing factories, common types of boilers include the following: Steam boilers: Steam boilers are one of the most commonly used types of boilers in textile processing plants. They produce high-temperature, high-pressure steam, which is used for thermal treatment, dyeing, boiling, and other processes during textile processing. Steam boilers offer advantages such as rapid heating, high stability, and efficiency. Hot water boilers: Hot water boilers are suitable for low-temperature textile processing processes like washing and drying. They provide a stable supply of hot water with high temperature control accuracy and low energy consumption. Hot air boilers: Hot air boilers are used for drying processes in textile processing. They transfer heat energy to textiles through the hot air produced by combustion, achieving quick drying. Hot air boilers have the advantages of fast heating and high thermal efficiency. When selecting the appropriate boiler type for a textile processing plant, consider the following factors: Processing requirements: Determine the required heat medium (steam, hot water, hot air) and parameters such as working temperature and pressure based on the specific processing requirements of the textile factory. Energy costs and efficiency: Consider the energy consumption and efficiency of different boiler types and choose one that meets processing needs and has high energy utilization efficiency. Environmental requirements: Pay attention to the emission standards and environmental performance of the boilers and select the appropriate type accordingly. Maintenance and operation costs: Evaluate the maintenance and operation costs associated with different boiler types to ensure cost-effectiveness.

Common issues and solutions for gas boiler burners are as follows: 1. No flame or unstable flame: Check if the gas supply is normal and ensure the gas valve is open. Clean the burner nozzle to ensure the passage is clear. Inspect the ignition electrode for cleanliness, carbon buildup, or dirt. Adjust the gas-to-air ratio to ensure the correct mixture. 2. Incomplete combustion or black smoke: Check if the gas supply is sufficient and adjust the gas pressure. Clean the burner nozzle and combustion chamber to ensure the passage is clear. Adjust the gas-to-air ratio to ensure the correct mixture. Check for carbon buildup or dirt in the burner and clean or replace damaged parts. 3. Difficulty or failure to ignite: Inspect the ignition electrode for cleanliness, carbon buildup, or dirt. Adjust the position and gap of the ignition electrode to ensure normal spark generation. Check if the ignition transformer or controller is functioning properly, repair or replace damaged parts. 4. Abnormal noise from the burner: Check if the gas supply is normal and ensure the gas valve is open. Inspect the burner and combustion chamber for loose parts, tighten or replace damaged parts. Clean the burner and combustion chamber to ensure no carbon buildup or dirt. If the above methods do not solve the problem, it is recommended to contact a gas boiler maintenance technician for inspection and maintenance. Also, to ensure safety, follow the relevant safety operating procedures when using a gas boiler.

When using a thermal oil furnace with gas, the following points should be noted: - Safety Operation: A thermal oil furnace is a high-temperature equipment; safety must be observed during operation. Operators should be familiar with the equipment's operational procedures and safety precautions, wear necessary personal protective equipment, and ensure safe operation. - Gas Supply: A stable gas supply is required for a thermal oil furnace. Before use, check if the gas pipeline is clear and the gas valve is open to ensure normal gas supply. - Thermal Oil Circulation: A thermal oil furnace needs to circulate thermal oil to the heat source equipment through a circulation pump. Before use, inspect the pump's operation to ensure it is functioning properly. - Temperature Control: A thermal oil furnace typically requires a temperature control system to regulate the temperature of the thermal oil. Before use, check the settings and adjustments of the temperature control system to ensure accurate and reliable control. - Regular Maintenance: Thermal oil furnaces need regular maintenance and upkeep, including cleaning burners, checking the sealing of pipelines and valves, and replacing worn parts. Regular maintenance ensures the equipment operates smoothly and extends its service life. - Environmental Protection: During combustion, thermal oil furnaces produce exhaust gas, so ensure proper exhaust emissions. Implement appropriate exhaust treatment measures, such as flue gas purification equipment, to minimize environmental impact. - The above points are some precautions for using a thermal oil furnace with gas. To ensure safety and proper equipment operation, it is recommended to follow relevant operational procedures and safety requirements, and to perform regular maintenance and inspections. If necessary, consult the manufacturer or engineer of the thermal oil furnace for advice.

Potential operational issues with the fuel system of a thermal oil furnace include: - Inadequate fuel quality: Using low-quality or contaminated fuel can cause problems with the fuel system. For instance, the presence of impurities, water, or excessive additives can lead to clogs in the fuel pump, nozzle, and burner, affecting fuel supply and combustion efficiency. - Unregular cleaning or replacement of the fuel filter: The fuel filter's purpose is to filter out impurities and particles from the fuel to prevent them from entering the fuel system. If the fuel filter is not cleaned or replaced regularly, it can become clogged, affecting fuel flow and supply. - Improper adjustment of the fuel pump: Proper adjustment of the fuel pump is crucial for maintaining stable fuel supply volume and pressure. Incorrect adjustment can result in either excessive or insufficient fuel supply, leading to incomplete combustion or insufficient fuel supply, affecting the furnace's temperature and thermal efficiency. - Clogged or worn fuel nozzles: Fuel nozzles are key components that atomize and inject fuel into the furnace. Clogs or wear can cause uneven or incorrect fuel injection, affecting combustion efficiency and thermal output. - Inadequate fuel preheating: Fuel must be preheated before entering the burner to enhance combustion. Insufficient preheating can increase fuel viscosity, affecting its flow and injection performance. - Fuel system oil leaks: The sealing integrity of the fuel system is essential for stable fuel supply. Oil leaks in the fuel system can lead to fuel supply instability.
ZJ Special Equipment adheres to the grand vision of "realizing employees' dreams, creating customer value, and striving for the prosperity and strength of our motherland," and is dedicated to the development of the green energy equipment industry. We offer society products and services with high cost-performance!