Shandong Zhongjie Special Equipment (formerly Heze Boiler Factory Co., Ltd.) holds an A-grade boiler manufacturing license, an A2-grade pressure vessel manufacturing license, an A2-grade pressure vessel design license, a B-grade boiler installation license, and GB2/Class and GC2/Class pressure pipeline installation licenses, as well as a mechanical and electrical equipment installation contracting qualification. It is a member of the China Boilers and Water Treatment Association, the China Chemical Equipment Association, and the council unit of the Shandong Equipment Manufacturing Association. The company has also passed the ISO9001 Quality Management System, ISO14001 Environmental Management System, OHSAS18001 Occupational Health and Safety Management System certifications, and the American ASME/U2 certification.
Proper installation of a CO2 storage tank requires the following steps:  Site Preparation: Select an appropriate site for installation, ensuring it is level, stable, and meets safety distance requirements. Clear the site of any obstructions and fire sources.  Foundation Construction: Construct a foundation based on the tank's size and weight. The foundation must be sufficiently strong and stable to support the tank's weight and pressure.  Tank Installation: Place the tank on the foundation, ensuring there is appropriate padding and fastening between the tank and foundation. Connect and secure the tank according to its design specifications.  Pipe Connection: Connect the tank to the piping system as needed. Ensure the connections are sealed properly to prevent leaks.  Safety Equipment Installation: Install the necessary safety equipment for the tank, such as safety valves, pressure sensors, and temperature sensors. Ensure these devices are correctly installed and connected.  System Testing: Conduct system tests after installation, including pressure and leak tests, to ensure the tank and piping system operate safely and properly.  Identification and Warning Signs: Set up necessary identification and warning signs on the tank and piping system, including tank capacity and pressure information, to remind operators to be cautious.  Tank Maintenance: After installation, perform regular maintenance and upkeep on the tank, including cleaning, lubrication, and inspections, to ensure normal operation and extend the tank's lifespan.  Installation of CO2 storage tanks should be carried out by qualified installers and follow relevant safety operation procedures and standards. Seek advice and guidance from experts.

When handling CO2 storage tanks, static electricity is a safety issue that needs attention. Here are some methods to avoid static electricity: - Grounding: Ensure that the tank and related equipment are properly grounded. Grounding releases static electricity to the ground, reducing the likelihood of static buildup. Use specialized grounding devices and wires to ensure reliable grounding. - Static-Discharge Equipment: Use static-discharge equipment such as antistatic clothing, shoes, gloves, etc. These devices help eliminate or reduce static buildup and protect the operator's safety. - Avoid Friction: Prevent friction during operation, especially when in contact with substances or flammable gases. Friction generates static electricity, increasing the risk of fire or explosion. - Control Humidity: Maintain an appropriate humidity level in the operating environment; higher humidity can reduce the generation and accumulation of static electricity. Use humidifiers or other humidity control devices to adjust the environmental humidity. - Avoid Plastic or Rubber Materials: Plastic and rubber materials are prone to static electricity, so try to avoid using these materials during operation. Choose materials with better antistatic properties for handling. - Static Eliminators: Use static eliminators to eliminate or reduce static buildup. Static eliminators neutralize static by releasing charges, reducing the danger of static electricity. - Tank Cleaning: Regularly clean the interior of the tank to remove accumulated impurities and dirt. Be mindful of preventing the generation and accumulation of static electricity during cleaning. Note that the methods to avoid static electricity should be determined according to the specific operating environment and tank characteristics. During operation, follow relevant safety regulations and standards, and consult with experts if necessary.

When selecting a carbon dioxide tank support, consider the following factors: Load Capacity: The design and selection of the support should be able to bear the weight and pressure of the tank. The load-bearing capacity of the support should be determined based on the tank's size, weight, and working conditions. Stability: The support should have sufficient stability to prevent tilting or collapse of the tank during use. The design of the support should take into account the center of gravity location and changes of the tank to provide stable support. Corrosion Resistance: As carbon dioxide has some corrosive properties, the material of the support should have good corrosion resistance to prevent corrosion and damage. Installation and Maintenance Ease: The design of the support should consider ease of installation and maintenance for the convenience of tank installation, adjustment, and maintenance. Compliance with Standards and Regulations: The design and selection of the support should comply with relevant standards and regulations, such as Standard GB150 "Steel Pressure Vessels." Additionally, other related factors such as cost, reliability, and durability can also be considered. When selecting a support, consult engineers or consulting companies for advice and guidance.

In daily operation, CO2 cylinders require protection and maintenance to ensure proper functioning and safety. Here are some common protection and maintenance methods: - Visual Inspection: Regularly check the cylinder's exterior for corrosion, wear, and cracks. Take prompt repair actions upon discovering any anomalies. - Seal Integrity Check: Regularly inspect the cylinder's sealing performance, particularly at valves, pipe connections, and the cylinder itself. Ensure there are no leaks, and promptly fix any that are found. - Temperature Control: Maintain a suitable ambient temperature around the cylinder and implement appropriate insulation measures to ensure the cylinder's internal低温 state. - Pressure Relief Device Inspection: Regularly check the cylinder's pressure relief devices, such as safety valves, to ensure they are functioning correctly. Verify that the set pressure of the relief devices meets requirements and perform regular maintenance and replacements. - Level Monitoring: Regularly monitor the cylinder's liquid level to ensure accurate measurements. If an abnormal level is detected, promptly investigate the cause and take appropriate actions. - Regular Cleaning: Regularly clean the interior of the cylinder to remove accumulated impurities and dirt. Pay attention to safety during cleaning and avoid using flammable and corrosive substances. - Regular Testing: Regularly conduct pressure tests and leak detection on the cylinder to ensure it meets safety performance requirements. The frequency and methods of testing should comply with relevant regulations and standards. - Storage Capacity Control: Control the cylinder's storage capacity to prevent exceeding the rated capacity. Overfilling can lead to excessive pressure and increased safety risks. It should be noted that specific protection and maintenance methods may vary depending on the type of cylinder and its application.
Shandong Zhongjie Special Equipment, welcome customers to visit our factory for business discussions.