Shandong Zhongjie Special Equipment (formerly Heze Boiler Factory Co., Ltd.) was established in 2001, located at No. 2218 Jinnan Road, Economic and Technological Development Zone, Heze City. With a registered capital of 50 million yuan and total assets of 500 million yuan, the company has seven business centers: boilers, deep-freezing containers, pressure vessels, central air conditioning, engineering installation, international trade, and Internet of Things. It has three factory sites on Jinnan Road, East Changjiang Road, and Bohai Road, covering a total of 200,000 square meters. The main workshop spans 83,000 square meters. It currently employs 710 staff, including 247 engineers and technicians and 82 intermediate-level technicians. In December 2016, it was recognized as a "High-Tech Enterprise" by the Science and Technology Department. In June 2021, it was identified as a "Specialized and New Enterprise in Shandong Province" by the Ministry of Industry and Information Technology. In June 2022, it was named a "Gazelle Enterprise in Shandong Province" and in August 2022, it was recognized as a "Specialized and New Small Giant Enterprise" by the Ministry of Industry and Information Technology.
Before starting the heating gas hot water boiler, the following proper procedures must be followed: - Check the gas supply system: Ensure the gas supply system is operating correctly, inspect gas pipes, valves, and pressure regulators, ensuring there are no leaks or blockages in the gas supply. - Inspect the water system: Check the water circulation system of the heating system, including pumps, valves, and pipes, ensuring the waterways are clear of leaks and blockages. - Check the electrical system: Inspect the boiler's electrical system, including power connections, controllers, and sensors, ensuring the electrical equipment is functioning properly. - Check safety devices: Inspect the boiler's safety devices, including safety valves, pressure switches, and water level controllers, ensuring they are working correctly to guarantee the safe operation of the boiler. - Prepare for ignition: Follow the boiler's operating instructions to prepare the tools and equipment needed for ignition, including an igniter and ignition electrode. - Open the gas valve: Slowly open the gas valve to ensure a steady gas supply and avoid gas surges. - Ignition start: Follow the boiler's operating instructions to ignite and start the boiler. Perform the corresponding operations based on the boiler model and control system to ensure smooth ignition. - Monitor operating status: After starting, closely monitor the boiler's operating status, including combustion, water level, and pressure, ensuring normal operation without any anomalies. - Adjust parameters: Adjust the boiler's parameters as needed, including temperature, pressure, and water level, to meet the requirements of the heating system. - Regular maintenance: After starting, perform regular maintenance, including cleaning the burner, checking water level and pressure, and replacing worn parts, to ensure normal operation and safety of the boiler. - It is recommended to refer to the boiler's operation manual and manufacturer's guidelines before starting the heating gas hot water boiler to ensure correct and safe operation. If necessary, hire personnel for operation and maintenance.

WNS Low Nitrogen Condensing Hot Water Boilers offer the following advantages: - Low Nitrogen Emissions: Utilizing low nitrogen combustion technology, these boilers significantly reduce NOx emissions by optimizing the combustion process and burner design. This aids in reducing environmental pollution. - High Thermal Efficiency: The WNS Low Nitrogen Condensing Hot Water Boilers employ condensing technology to enhance energy utilization efficiency by recovering heat from flue gases. The thermal efficiency typically exceeds 90%, surpassing that of traditional hot water boilers, thereby helping to conserve energy and lower operational costs. - Safety and Reliability: Equipped with advanced control systems and safety devices, these boilers have excellent safety performance. They are fitted with multiple safety features, including overheat protection, overpressure protection, and water level protection, which automatically monitor and control the boiler's operation to ensure safe operation. - Flexibility: The WNS Low Nitrogen Condensing Hot Water Boilers are suitable for various applications, including industrial, commercial, and residential settings. They can accommodate different thermal load requirements, offering strong flexibility. Moreover, they can be integrated with other systems, such as solar hot water systems and ground-source heat pump systems, to further enhance energy efficiency. - Easy Operation and Maintenance: The operation and maintenance of the WNS Low Nitrogen Condensing Hot Water Boilers are straightforward and convenient.

Yes, durable thermal oil boilers typically have a longer lifespan. Here are some reasons: Material Quality: Thermal oil boilers are made from high-quality materials, such as heat-resistant and corrosion-resistant steel and alloy materials. These materials can withstand high temperatures and pressures, offering good durability and corrosion resistance, thereby extending the boiler's lifespan. Design and Manufacturing Process: Long-lasting thermal oil boilers often employ specific design and manufacturing processes. Reasonable structural design and precise manufacturing techniques can reduce stress concentration and thermal stress, enhancing the boiler's stability and durability. Regular Maintenance and Care: Regular maintenance and care are crucial for extending the lifespan of thermal oil boilers. Regularly cleaning and inspecting the internal pipes, flues, and burners, and promptly replacing worn-out parts, can minimize malfunctions and damage, extending the boiler's life. Proper Operation and Management: Correct operation and management are also vital factors in ensuring the lifespan of thermal oil boilers. Operators should follow the operation manual and procedures, avoid overloading and improper operations, ensuring the boiler runs safely and stably. It should be noted that even durable thermal oil boilers require regular inspections and maintenance to ensure proper operation and extend their lifespan. Additionally, the lifespan of the boiler is affected by factors such as the operating environment, load conditions, and operating methods. Therefore, reasonable use and maintenance are key to ensuring the longevity of thermal oil boilers.

The Zhongjie modular heat transfer oil furnace is a common industrial thermal energy equipment with the following product features: High thermal efficiency: The Zhongjie modular heat transfer oil furnace utilizes advanced combustion technology and heat exchanger design, effectively transferring the thermal energy generated by fuel combustion to the heat transfer oil, achieving energy utilization and improving thermal efficiency. Stable and reliable: Made with materials and precision manufacturing processes, this furnace boasts excellent high-temperature resistance and stable operational status, ensuring long-term stable operation with high reliability. Temperature control: Equipped with a temperature control system, the Zhongjie modular heat transfer oil furnace can monitor and adjust the temperature of the heat transfer oil in real-time, guaranteeing temperature accuracy and stability during the process. Safety protection: The furnace is equipped with multiple safety protection devices such as overheat protection, pressure protection, and burner fault protection, effectively preventing accidents. Additionally, it employs clean combustion technology, producing minimal emissions and being environmentally friendly. Easy operation: The Zhongjie modular heat transfer oil furnace features an intelligent control system with a user-friendly interface and easy parameter adjustment, simplifying operation and reducing difficulty and labor costs. Overall, the Zhongjie modular heat transfer oil furnace is characterized by stability and reliability, suitable for various industrial fields such as chemicals, textiles, and food processing, providing users with reliable thermal energy supply and process temperature control.
Our company attaches great importance to technological innovation and R&D design. We possess one municipal-level enterprise technology center in Heze City, and have established testing facilities for non-destructive testing, physical and chemical testing, welding testing, hydrostatic testing, etc. We are equipped with over 600 pieces of various instruments and equipment, including CNC machine tools, X-ray flaw detectors, digital ultrasonic flaw detectors, mechanical property testing machines, chemical analyzers, spectrometers, tensile testing machines, plasma welding machines, and more. The key products and technologies we have developed, such as welding for temperature-pressure vessels, biomass boiler emission reduction, and waste heat utilization, have successively been shortlisted for multiple Shandong Provincial Department of Industry and Information Technology science and technology projects, Shandong Provincial key projects, and Heze City innovation and excellence projects. We have accumulated 27 authorized utility models, 16 authorized inventions, participated in drafting 2 standards, 2 industry standards, and registered 15 trademarks. The technical team of our company, in collaboration with Professor Yajiang Li from Shandong University, has jointly developed deep cryogenic container processing technology, utilizing the international plasma arc + wire feeding argon arc welding (PAW-GTAW) technology. After provincial-level scientific and technological achievement evaluation, the technical level has reached international standards in the field of deep cryogenic container manufacturing.
Choose Jeteer Custom Solutions, let's create brilliance together!