Shandong Zhongjie Special Equipment Co., Ltd. (formerly Heze Boiler Factory Co., Ltd.) was established in 2001 and is located at No. 2218 Jinnan Road, Development Zone, Heze City. With a registered capital of 50 million yuan and total assets of 500 million yuan, the company operates seven business centers: boilers, deep-freeze containers, pressure vessels, central air conditioning, engineering installation, international trade, and Internet of Things. It has three factory sites on Jinnan Road, East Yangtze Road, and Bohai Road, covering a total of 200,000 square meters, with the main workshop spanning 83,000 square meters. The company currently has 710 employees, including 247 engineers and technicians and 82 intermediate-level technicians. In December 2016, it was recognized as a "High-tech Enterprise" by the Science and Technology Department. In June 2021, it was identified as a "Specialized and New Enterprise in Shandong Province" by the Ministry of Industry and Information Technology. In June 2022, it was named a "Gazelle Enterprise in Shandong Province," and in August 2022, it was recognized as a "Specialized and New Small Giant Enterprise" by the Ministry of Industry and Information Technology.
Based on the provided information, I cannot accurately determine the heating area for a 40-ton gas-fired hot water boiler or the gas pressure for an atmospheric gas boiler. The determination of these parameters requires consideration of multiple factors, including the boiler's design specifications, the type and quality of the gas, and the heating system requirements. The heating area is typically calculated based on the size of the building or industrial production facility requiring heating and the thermal load. Common calculation methods include thermal load calculations based on the building's floor area, the climate conditions of the region, and the required indoor temperature. The gas pressure depends on the type of gas and the design of the gas supply system. Different types of gas have varying pressure requirements. The gas pressure also needs to consider factors such as the gas pipeline's length, diameter, and material. Therefore, for an accurate determination of the heating area for the 40-ton gas-fired hot water boiler and the gas pressure for the atmospheric gas boiler, it is recommended to consult the boiler manufacturer or engineer, who can calculate and design based on the specific situation.

The necessity of flow control in thermal oil heaters is primarily reflected in the following aspects: 1. Heat Transfer Efficiency: The heat transfer efficiency of thermal oil heaters is closely related to the flow rate of thermal oil. Appropriate flow rates ensure that heat is fully transferred within the heat exchanger, enhancing heat utilization efficiency. Excessive low flow rates can lead to inadequate heat exchange and affect heat transfer effectiveness, whereas excessive high flow rates will increase energy consumption and operating costs. 2. Temperature Control: Flow control in thermal oil heaters is also closely linked to temperature control. By adjusting the flow rate of thermal oil, the internal temperature of the heater can be controlled, ensuring stable operation within the set working temperature range. Excessive low flow rates can lead to overheating, and excessive high flow rates can result in underheating, both of which can impact normal equipment operation. 3. System Stability: Proper flow rates of thermal oil can enhance system stability. Flow control helps balance the supply and demand of heat energy, preventing overheating or undercooling situations, and maintaining stable system operation. Stable operation contributes to extending the service life of equipment and reducing the frequency of malfunctions and repairs. 4. Safety: Flow control in thermal oil heaters is also crucial for safety. Appropriate flow control can prevent excessive accumulation of thermal oil in the system, reducing the risk of leaks and explosions. Additionally, flow control ensures that the system pressure remains within safe limits, avoiding overpressure and other safety issues. In summary, flow control in thermal oil heaters is essential for improving heat transfer efficiency, temperature control, system stability, and safety. Through reasonable flow control, the operation of thermal oil heaters can be optimized, energy utilization efficiency can be enhanced, operating costs can be reduced, and the safety and stable operation of the equipment can be ensured.

Yes, thermal oil boilers typically come with some self-protection features to ensure safe operation and extend their service life. Here are some common self-protection functions: Overheat Protection: Thermal oil boilers are equipped with overheat protection devices that automatically shut off the burner's gas supply when the thermal oil temperature exceeds the set safe range, preventing overheating of the thermal oil and avoiding equipment damage and safety accidents. Overpressure Protection: Thermal oil boilers also have overpressure protection devices that automatically shut off the burner's gas supply when the thermal oil pressure exceeds the set safe range, preventing explosions or leaks in the thermal oil system. Burner Automatic Control: The burners of thermal oil boilers are usually equipped with automatic control systems that can automatically adjust the gas supply and combustion effect based on set operating parameters, maintaining a stable combustion state and avoiding incomplete combustion or excessive combustion. Temperature Control and Adjustment: Thermal oil boilers are typically equipped with temperature control and adjustment devices that can automatically regulate the circulation and heating of the thermal oil based on the set working temperature, maintaining a stable working temperature and avoiding excessive or low temperatures. Water Level Protection: For some thermal oil boilers, especially water tube thermal oil boilers, water level protection devices are also installed to monitor the water level of the thermal oil and water. When the water level is abnormal, the protection device automatically shuts off the burner's gas supply to prevent dry burning and thermal oil leakage. It is important to note that while thermal oil boilers have self-protection features, they still require regular inspections and maintenance to ensure the normal operation and reliability of these protection devices. Additionally, operators need to understand and master the working principles and operation methods of these self-protection functions to ensure safe operation.

In the burner of a thermal oil furnace, adjusting the air door under low flame conditions is crucial. Here are some common knowledge and precautions: The function of the air door: The air door is a key component in the burner that controls the supply of combustion air. By adjusting the opening of the air door, the flow of combustion air can be controlled, thereby affecting the oxygen supply and combustion effect during the combustion process. Adjustment under low flame conditions: Under low flame conditions, the burner needs to maintain stable combustion to ensure combustion efficiency and heat output. In this case, it is necessary to adjust the opening of the air door appropriately to maintain an adequate supply of combustion air. Generally, the opening of the air door is relatively small during low flame conditions to maintain an appropriate oxygen supply, avoiding incomplete combustion or instability. Ratio of combustion air to fuel: Under low flame conditions, it is necessary to ensure the appropriate ratio of combustion air to fuel. Excessive combustion air can lead to incomplete combustion and energy waste, while insufficient combustion air can cause instability in combustion and the production of harmful gases. By adjusting the opening of the air door, the ratio of combustion air to fuel can be controlled to achieve a stable combustion effect. Burner tuning and optimization: During the installation and tuning of the burner of a thermal oil furnace, appropriate tuning and optimization are required. Through actual operation and monitoring, adjust the opening of the air door and other parameters to achieve the best combustion effect and energy efficiency performance. This requires...
Our company attaches great importance to technological innovation and R&D design. We have one municipal-level enterprise technology center in Heze City, equipped with testing facilities for non-destructive testing, physical and chemical testing, welding testing, hydrostatic testing, and more. We have over 600 various instruments and equipment, including CNC machine tools, X-ray flaw detectors, digital ultrasonic flaw detectors, mechanical property testing machines, chemical analyzers, spectrometers, tensile testing machines, plasma welding machines, and others. The key products and technologies we have developed, such as temperature and pressure vessel welding, biomass boiler emission reduction, and waste heat utilization, have successively been selected for multiple Shandong Provincial Department of Industry and Information Technology science and technology innovation projects, key projects in Shandong Province, and Heze City innovation and excellence projects. We have accumulated 27 authorized utility model patents, 16 authorized invention patents, participated in drafting 2 standards, 2 industry standards, and registered 15 trademarks. The technical team of our company, in collaboration with Professor Yajiang Li of Shandong University, has developed deep cryogenic container processing technology using the international plasma arc + filler wire tungsten inert gas arc welding (PAW-GTAW) technology. The provincial-level scientific and technological achievement identification has confirmed that the technology level in the deep cryogenic container manufacturing field has reached international standards.
Choose ZJET for excellence, let's create brilliance together!