SRYIIF type flanged焊接Y-shaped filter

Component Description: 1. Imported Flange; 2. Slope Plate; 3. Valve Body; 4. Filter Core; 5. Outlet Flange.6. Fasteners; 7. Mid-section Flange; 8. Gasket; 9. Blind Plate10. Outfall;

SRYIIW Type Welded Y-Shape Filter

Part Description: 1. Slope plate; 2. Valve body; 3. Filter element; 4. Fasteners; 5. Middle flange; 6. Gasket; 7. Blind plate; 8. Drain port.

I. Product Introduction

The SRYII type welded Y-type filter is a pipeline coarse filter, suitable for filtering large particle matter in liquids, gases, or other media. Installed on pipelines, it can remove larger solid impurities from fluids, enabling machinery and equipment (including compressors, pumps, etc.) and instruments to operate normally, achieving stable process conditions and ensuring safe production.

When fluid enters the filter tube equipped with a filter mesh of specific specifications, impurities are blocked, and the clean filtrate is discharged from the filter outlet. When cleaning is required, simply remove the detachable filter tube, clean it, and reinsert it. Therefore, the use and maintenance are extremely convenient.

Section II: Product Advantages

1. The SRYII type welded Y-type filter is manufactured using welding technology, ensuring a steady fluid flow into the filter with reduced pressure drop.

2. Filter installation and maintenance are simple, and cleaning the filter mesh is convenient.

3. The Y-type filter valve body is sandblasted; carbon steel material requires two coats of primer and topcoat.

4. Packaging is unified with standard wooden crates.

Section 3: Installation Precautions

1. Steam or gas pipeline: filter screen facing horizontally.

2. Liquid Pipeline: Filter screen installed facing down.

3. Vertical Mounting: As per filter installation direction.

Section 4: Common Metal Wire Mesh Parameters Table

V Type Filter Pressure Drop Value

*Unit: Pa.

Section 6: Relevant Standards for the Product

• SH/T 3411-2017---------"Selection, Inspection, and Acceptance Criteria for Filters Used in Petroleum and Chemical Industry Pumps"

• HG/T21637-2011--------"Chemical Pipeline Filter Series"

• GB/T5330-2003---------- "Industrial Metal Wire Woven Square Mesh Screen"

• GB/T14382-2008---------Pipe Three-way Filter

• SH/T3059-2012-----------"Code for Selection of Design Materials for Petroleum Chemical Pipeline Equipment"