SRTIIF type flanged connection reverse flow T-type filter
Part Description:
1. Export Flanges; 2. Slope Plates; 3. Filter Cartridges; 4. Valve Bodies; 5. Fasteners; 6. Drain Ports7. Blind Flanges; 8. Gaskets; 9. Center Flanges; 10.进口法兰 (Import Flanges)
SRTIIW Type Welded Elbow Flow Reverse T-Filter
Part Description:
1. Valve body; 2. Slope plate; 3. Filter element; 4. Fasteners; 5. Middle flange; 6. Blind plate; 7. Drain port; 8. Gasket
I. Product Introduction
The SRTII Type Reverse Flow T-Filter is a coarse pipeline filter, suitable for filtering large particles from liquids, gases, or other media. Installed on the pipeline, it can remove larger solid impurities from the fluid, ensuring normal operation and operation of machinery and equipment (including compressors, pumps, etc.) and instruments, contributing to stable process operations and ensuring safe production.
Once the fluid enters the filter housing equipped with a specified filter screen, impurities are blocked while the clean filtrate is discharged through the filter outlet. When cleaning is required, simply remove the detachable filter housing, clean it, and reinsert it. Thus, the maintenance is extremely convenient.
Section 2: Product Advantages
1. The SRTI type right-angle T filter is manufactured using welding technology, consisting of standard seamless tees and socket weld flanges.
2. The helical T-type filter is generally installed at the right-angle bend of the pipeline, featuring a small footprint, easy cleaning, and cost-saving.
3. The T-type filter valve body is sandblasted, and carbon steel material requires two coats of primer and topcoat.
4. Packaging is unified with standard wooden crates.
III. Installation Precautions
Install according to the arrow direction on the filter cylinder.
Section 4: Common Metal Wire Mesh Specifications Table
V. Pressure Drop Value of T-Type Filters
*Unit: Pa.
Section 6: Relevant Standards for the Product
• SH/T 3411-2017---------"Selection, Inspection, and Acceptance Specification for Filters Used in Petrochemical Pumps"
• HG/T21637-2011——"Chemical Pipeline Filter Series"
GB/T5330-2003——Industrial Metal Wire Woven Square Hole Sieve
• GB/T14382-2008 - Pipe Fitting Three-Way Filter
• SH/T3059-2012-----------"Code for Selection of Equipment for Petroleum and Chemical Pipeline Design"
