Part Description:

1. Eye bolts; 2. Exhaust ports; 3. Fasteners; 4. Cylinder blind flanges; 5. Gaskets; 6. Cylinder flanges; 7. Export flanges; 8. Inlet and outlet tees.9. Filter Basket; 10. Cylinder; 11. Bottom Flange; 12. Drain Outlet; 13. Leg; 14. Slope Plate; 15. Imported Flange

I. Product Introduction

The SRBIIF type straight-through bonnet filter basket is a pipeline coarse filter, suitable for filtering large particles from liquids, gases, or other media. Installed on the pipeline, it can remove larger solid impurities from the fluid, ensuring that machinery and equipment (including compressors, pumps, etc.) and instruments operate normally, achieving stable process operation and ensuring safe production.

Once the fluid enters the filter housing equipped with a specified filter mesh, impurities are blocked, and the clean filtrate is discharged from the filter outlet. When cleaning is required, simply remove the detachable filter housing, clean it, and then reassemble it, making maintenance extremely convenient.

Bowl filters have a larger filtration area compared to Y and T type filters, which helps avoid frequent cleaning of the filter sleeves and ensures more stable filtration performance during use.

II. Product Advantages

1. The SRBIIF type straight-through bonnet filter basket is manufactured using welding technology, consisting of a nozzle, main pipe, filter basket, flange, flange cover, and bonnet, etc.

2. The basket-type filter has a large filtering area, requiring less frequent cleaning and replacement of filter sleeves, significantly reducing labor costs and minimizing potential hazards during the replacement process.

3. Basket filter appearance should be shot blasting or polished; carbon steel material requires two coats of primer and topcoat.

4. Packaging is统一in standard wooden crates.

III. Installation Precautions

Install the pipe according to the arrow indicated on the valve body.

Section 4: Common Metal Wire Mesh Specifications Table

V. Pressure drop value of the basket filter

* Unit: Pa.

Section 6: Relevant Regulations for the Product

• SH/T 3411-2017-------- Specification for Selection, Inspection and Acceptance of Filters for Petrochemical Pumps

• JB/T7538-2016 —— Pipeline Basket Filter

• HG/T21637-2011--------"Chemical Pipeline Filter Series"

• GB/T5330-2003---------- "Industrial Metal Wire Woven Square Hole Screen"

• GB/T14382-2008---------Pipe Fitting Three-Way Filter

• SH/T3059-2012 -------------- "Code for Selection of Design Equipment for Petroleum Chemical Pipeline Systems"