I. Equipment Introduction

Chiller Refrigerant Charging Equipment, designed to fill high-pressure small containers with refrigerant by pressurizing it from low-pressure large containers. Suitable for filling gas cylinders of 0.5L/1L/2L/3L/5L and reactors. The equipment operates with manual control.

Section II: Application Scope

High-pressure filling and refilling of refrigerant gas cylinders

Coolant High-Pressure Transfer

Chiller Media Reactor High-Pressure Filling

Section 3: Main Technical Parameters：

Charging Medium: Refrigerant

2. Filling Pressure: 3 MPa

3. Import Dimensions: Cylinder Fitting

4. Interface Size: Available with quick connectors for small gas bottles or custom-made connectors

5. Drive Interface: 12MM PU Tube Quick Connect Interface

6. Drive Requirements: Compressed air 0.6-0.8 MPa, 0.7 m³/min

4. Brief Operation Steps

1. Connect gas and refrigerant sources
2. Inflated Cylinder Connection
3. Set filling pressure
4. Turn on the drive-in, and the equipment begins to fill up.
5. Filling stops after reaching the set pressure
6. Close the [Filling Valve]
7. Remove the filling assembly and replace it with another filling assembly.
8. Open the filling valve, and the equipment will automatically start filling.
9. This type of equipment is a non-standard product. Specific parameters, appearance, and pricing are subject to the technical requirements.