Equipment Introduction
Water Pressure Test Bench for pressure-bearing components' hydraulic pressure resistance and爆破 tests. The entire equipment consists of three main parts: the computer control section, the booster power source section, and the test chamber section. The computer controls the entire testing process, allowing for the setting of single or multi-stage pressure maintenance tests, as well as direct bursting after pressure maintenance. The pressure increase speed can be maintained constant, enabling automatic pressure adjustment. Test data and curve parameters can be displayed in real-time, test results can be automatically saved, and test reports can be printed at will. Through the pressure control system, high-pressure pipelines deliver pressure to the pressure-bearing components inside the test chamber for static and爆破 tests, assessing the components' sealing and pressure resistance performance.
Application Scope
Various hose, rubber hose, hydraulic hose assemblies, compressor housings, automotive hoses, metal piping, oil pipelines, automotive steering pipes, brake pipes, air conditioning pipes, fuel pipes, cooling water pipes, radiators, heating and air conditioning hoses, hydraulic equipment, condensers, evaporators, air conditioning filter element hoses, turbocharger system hoses, automotive brake pumps, cylinders, engineering hydraulic hoses, aviation hoses and manifolds, rigid pipes, connectors, valves, pressure gauges, pressure vessels, pressure transmitters, etc., their burst pressure tests and destructive tests.
Technical Specifications:
1. Test Functions: Voltage Resistance Test, Burst Test
2. Test Pressure: 2.5MPa, 4MPa, 6MPa, 10MPa, 25MPa, 40MPa, 60MPa, 100MPa, 120MPa, 150MPa, 240MPa, 300MPa, 400MPa
3. Inspection of medium: Water, hydraulic oil, or customer-specified medium
4. Test Station: 1 Station
5. Measurement Accuracy: 0.5% FS
6. Control Method: Manual
7. Drive Pressure: 5-8 bar
Power Supply: 220V 50Hz
9. Operating Environmental Temperature: Room Temperature
Equipment Features
All components are installed in a sealed housing structure, which is simple in design, with secure and reliable connections. The control panel is positioned at the front, facilitating observation and operation.
b Can set single or multiple pressure holding tests arbitrarily, and can also directly burst after pressure holding. The pressure increase speed can be maintained constant.
The C machine is equipped with an internal mechanical pressure switch. The output pressure can be set via an air-powered switch. The booster will automatically shut off when the output pressure reaches the set value.
The unit is equipped with an internal high-pressure one-way valve and filter, ensuring safety and reliability.
The control unit is simple, utilizing pneumatic control throughout, ensuring safety and reliability.
Low maintenance costs, good economy.
