Equipment Introduction
Water pressure test bench for pressure-bearing components' pressure resistance and burst tests. The entire equipment consists of two parts: the pressure-increasing power source and the test chamber. The equipment is manually controlled, with the high-pressure pump driven by compressed air. The driving gas pressure is adjusted according to the different pressures of the tested components. The high-pressure pump generates high-pressure liquid, which is then transported through a pressure control system to the pressure-bearing components inside the test chamber for static and burst tests. This evaluates the sealing performance and pressure resistance of the pressure-bearing components.
Application Range
A variety of hoses, rubber hoses, hydraulic hose assemblies, compressor casings, automotive hoses, metal piping, oil pipelines, steering hoses, brake lines, air conditioning lines, fuel lines, coolant water lines, radiators, heating and cooling hoses, hydraulic equipment, condensers, evaporators, air conditioning filter element hoses, turbocharger system hoses, automotive brake pumps, cylinder blocks, engineering hydraulic hoses, aviation hoses and fittings, rigid pipes, connectors, valves, pressure gauges, pressure vessels, pressure transmitters, etc., all undergo pressure strength burst tests and destructive tests.
Technical Specifications:
1. Test Functions: Voltage Resistance Test, Burst Test
2. Test Pressure: 2.5 MPa, 4 MPa, 6 MPa, 10 MPa, 25 MPa, 40 MPa, 60 MPa, 100 MPa, 120 MPa, 150 MPa, 240 MPa, 300 MPa, 400 MPa
3. Inspection Medium: Water, hydraulic oil, or as agreed by the customer
4. Test Station: 1 Station
5. Pressure Gauge Accuracy: 1.6 Class
6. Control Method: Manual
7. Drive Pressure: 5-8 bar
8. Operating Environment Temperature: Room Temperature
Equipment Features
All components are mounted in a sealed housing structure, featuring simple design and secure connections. The control panel is located at the front for easy observation and operation.
Manual valve control for quick shutdown of the turbocharger's air-driven pipeline, immediately stopping the turbocharger.
The c machine is equipped with an internal mechanical pressure switch, the output pressure can be set through an pneumatic switch. The booster automatically shuts off when the output pressure reaches the set value.
The unit is equipped with an internal high-pressure one-way valve and filter, ensuring safety and reliability.
The control unit is simple, utilizing pneumatic control throughout, ensuring safety and reliability.
Low maintenance costs, good economy.
