Integrated Water Purifier, Siphon Backwash Water Purifier

For integrated water purifiers, sometimes PE pipes are required after installation, and that's when quick connectors come into play. However, many users are unfamiliar with how to use quick connectors when they first encounter them—how to insert them without leaks and how to remove them properly. These are all methods that can be learned.

1. Functional tools required for the connection and disconnection of the integrated water purifier: Quick Connect Fittings, PE Pipe

2. There are two types of quick connect couplings: one with a blue card and one without. The operation is mostly the same. When removing the tube, for couplings with a blue card, first remove the card. Hold the coupling with one hand and use a finger nail to press down on the spring clip at the top of the coupling. With the other hand, firmly grip the PE tube and gently pull outward. For couplings without a blue card, start from this step directly.

3. The steps for inserting into the PE pipe are the opposite. Hold the connector in one hand and the pipe in the other. No need to press the spring clip here; just insert it with a slight force. Once you feel a little resistance in the pipe, it's properly inserted.

4. If you have a blue card, place it on the card slot; if not, you're all set.

Be mindful not to pull the connectors of the integrated water purifier too forcefully, as it may harm your nails. However, the process of plugging and unplugging the wiring is relatively simple during use; just pay extra attention during actual operation.