Inten Explosion-Proof Cooling (Hot Water) UnitProduct Specifications
Spec: 12 HP
Brand: YingTeng
Cooling Capacity: 35 kW (30.1 × 10^3 kcal/h)
Power: 380V/3ph/50Hz
Total Power: 12.5kW
Rated Current: 24.0A
Compressor Type: Scroll
Power: 10.1 kW
Pump Power: 1.2 kW
Headwater: 29m
Flow Rate: 6.0 m³/h (100 L/min)
Water Tank Capacity: 135L
Assume Size DN40
Noise: 65 dB(A)
Engineered Weight: 340 kg
Dimensions: Length 1510mm, Width 750mm, Height 1480mm
Ex db ib mb IIB T4 Gb / Ex db ib mb II CT4 Gb
Note: The above technical specifications are for reference only, and the physical product shall prevail.
The above cooling capacity is based on an ambient temperature of 35°C, an inlet water temperature of 12°C, and an outlet water temperature of 7°C.
Customizable Industrial Low-Temperature Water Chiller with Air Cooling, -5°C Customizable Industrial Low-Temperature Water Chiller with Air Cooling, -5°C Customizable Industrial Low-Temperature Water Chiller with Air Cooling, -15°C Customizable Industrial Low-Temperature Water Chiller with Air Cooling, -35°C
Manufacturer: Henan Tongteng Explosion-Proof Electrical Appliances Co., Ltd.
Yinteng Explosion-proof Chilled (Hot) Water UnitThe product series adheres to the following standards:
GB/T 3836.1-2021 "Explosive Atmospheres *Part 1: Equipment General Requirements"
GB/T 3836.2-2021 "Explosive Atmospheres - Part 2: Equipment protected by隔爆外壳 'd'"
GB/T 3836.4 - 2021 "Explosive Atmospheres - Part 4: Equipment protected by intrinsic safety 'i'"
GB/T 3836.9 - 2021 "Explosive Atmospheres *Part 9: Equipment protected by "m" type enclosures"
GB/T 3836.15-2017 "Explosive Atmospheres *Part 15: Design, Selection, and Installation of Electrical Equipment"
YingTeng Explosion-Proof Chilled (Hot) Water UnitOperates normally under the following environmental conditions:
a) Altitude not exceeding 2,000m.
b) Applicable environmental conditions: Temperature -7°C to 43°C, free from corrosive gases.
c) There are hazardous areas where flammable gases, steam, and air mixtures, classified as II A, II B, and T1 to T4 groups, pose explosion risks.
YingTengExplosion-proof Cold (Hot) Water Chiller UnitSeries models are processed with special explosion-proof technology, suitable for widespread use in flammable and explosive areas of Zones 1 and 2. They are widely applicable in scientific research, oil, chemical industry, pharmaceuticals, power plants, and other locations where there may be or could be II A, II B, T1-T4 groups of combustible gases, vapors, and air mixtures posing explosion hazards.Explosion-proof Cold (Hot) Water Chiller UnitSuitable for facilities with temperature requirements.Explosion-proof Cold (Hot) Water Chiller UnitInspected and certified by the National Explosion-Proof Electrical Products Quality Supervision and Inspection Center with explosion-proof certification and explosion-proof CCC certificate; featuring an aesthetically pleasing design, reasonable engineering, and easy installation and maintenance, the entire seriesExplosion-proof Cold (Hot) Water UnitInternally equipped with brand-name compressors, microcomputer intelligent control, digital display, featuring low noise, stable performance, simple operation, and reliable safety, it is highly favored by the market. (Customizable options include explosion-proof window-type air conditioners, explosion-proof duct-type air conditioners, explosion-proof ceiling-mounted air conditioners, explosion-proof fresh air air conditioners, explosion-proof marine air conditioners, explosion-proof corrosion-resistant air conditioners, explosion-proof high-temperature air conditioners, explosion-proof cold storage air conditioners, explosion-proof modular air conditioning units, and explosion-proof multi-split air conditioning units, etc.).
YingTeng Explosion-proof Cold (Hot) Water Chiller UnitProduct Features
International brand compressors, optimized rotor structure, stable quality, reliable operation.
External expansion valve, precise control, excellent refrigeration effect.
High-end stainless steel plate heat exchangers offer superior heat exchange efficiency and a unique design of cold and hot circulation partition plates.
High-quality fluid storage unit, optimizes system operation, stable working condition.
High airflow, low noise, external rotor series axial fans, powerful airflow.
High-head, low-noise stainless steel pumps from international brands, stable quality.
High-efficiency internal threaded tube finned heat exchangers with a unique turbulent window design for enhanced heat exchange efficiency.
Microcomputer controller with analog input/output, for precise control of unit temperature.
Ying TengExplosion-proof Cold (Hot) Water Chiller UnitComprehensive series, developed through years of industry experience and continuous optimization, offering a range of high-quality chillers. The entire series utilizes internationally renowned brands such as Copeland, Danfoss, Panasonic, and Daikin compressors, including scroll, piston, screw, semi-hermetic, and hermetic types. The units are equipped with high-efficiency copper tube fins, industrial stainless steel condensers, and evaporators, with materials reaching the highest industrial food-grade standards. Electrical components are from world brands like Siemens, Schneider, and ABB. Reliable quality and superior performance. The Yinteng explosion-proof chillers boast small size, low noise, high energy efficiency, long lifespan, and easy operation. A variety of refrigerants are available for selection, meeting low-temperature and special environment requirements.
The cooling machine control section utilizes a high-precision main control panel developed by Yinteng, a PLC programmable controller, a human-machine interface, and full Chinese display. It enables full-process, fully automatic computerized adjustment and control, making the unit control more precise and reliable.
YingtengExplosion-proof Cold (Hot) Water Chiller UnitCompact structure, small footprint, lightweight, easy to move. Balanced operation for safety, low vibration, no need for complex foundations, easy installation. Automatic protection features: high and low pressure protection, compressor protection, motor overload and overheating protection, frost protection, cold water and cooling water cutoff protection, temperature-sensitive fusible plug, safety valve.
