126kV Oil-impregnated Fiber Dry Type Wall-through Porcelain Insulated Capacitor Bushing

Product Introduction

This product is composed of a carrier fluid, an electrolytic capacitor core wrapped with fiber impregnated with resin, a ceramic jacket, flange, and end structure. Measurement terminals are provided on the flange, which are opened for use during partial discharge and dielectric loss factor measurements, and should be reliably grounded during normal operation. The two ends of the product are fitted with equipment clamps.

Reference Standards

·GB/T 4109-2008 "Insulating Sleeves for AC Voltage Above 1000V"

Product Model

Product Features

·Dry-type composite insulated capacitors, oil-free, gas-free

High resistance to soiling

· Good casing mechanical properties

Terms of Use:

· Environmental Temperature: -40℃ to +50℃

·Altitude: The product design is based on a 1000m altitude, with adjustments made according to GB 311 for altitudes exceeding 1000m.

·Contamination Level: IV (Special requirements, if any, to be noted)

Key Performance Indicators:

· Applicable rated voltage classes: 72.5kV, 126kV, 252kV

·Rated Current: ≤2500A