Product Details
价 格Negotiable
最小起订0 Piece库存0 Piece
Business Card
Negotiable
Negotiable
Negotiable
Negotiable
40.5kV High Current Dry Type Comp
Negotiable
12kV High Current Dry Type Compos
Negotiable
72.5kV Fiber-impregnated Dry Type
Negotiable
126kV Dry-Type Composite Capaciti
Negotiable
66kV Dry Type Composite Current T
Negotiable
Cable-through fiber-glass impregn
Negotiable
40.5kV Dry-type Composite Wall Pe
Negotiable
126kV Oil-impregnated Fiber Dry T
Negotiable
Bare-wire coated fiber dry-type t
Negotiable
72.5kV Dry Type Composite Wall-th
Negotiable
Product Introduction
This product consists of a carrier fluid, a capacitor core wrapped with胶浸fibers, a composite sheath/porcelain sheath, flange, and terminal structure. Measurement terminals are fitted on the flange, which are used for partial discharge and dielectric loss factor measurements. During normal operation, the flange should be securely grounded. Equipment clamps are provided at the outdoor end of the product.
Reference Standard
·GB/T 4109-2008 "Insulating Sleeves for AC Voltage Above 1000V"
Product Model
Product Features
Dry-type composite capacitive insulation, oil-free, gas-free
High dirt resistance level
· Good casing mechanical properties
Terms of Use:
·Ambient Temperature: -40℃ to +50℃
·Altitude: Design based on 1000m elevation; corrections are made according to GB 311 for elevations above 1000m.
·Contamination Level: IV (Special requirements to be noted if applicable)
Key Performance Indicators:
· Applicable rated voltage levels: 12~252kV
Rated Current: ≤6300A (Special design required for higher current if needed)
Phone Consultation