详情描述
Product Features
Low lossProduct empty-load loss ratio of SCB11 model is reduced by over 20%, demonstrating excellent energy-saving performance, economic operation, and maintenance-free.Low Noise
Low noiseThe product noise level is more than 10-15 decibels lower than the current professional standard JB/T10088-2004 for "Transformer Sound Levels at 6-220KV Grades."Low Emission
Low Partial DischargeThe resin blend utilizes advanced mixing techniques from overseas and vacuum film degassing, ensuring the mixture is well-mixed and completely de-gassed. The product features a low local discharge. Both high and low voltage coils are cast under vacuum and pressure, providing full encapsulation and interlayer impregnation for the resin insulation. The casting exhibits a dense curing structure, is flame-retardant, explosion-proof, and environmentally friendly. The insulating materials like glass fiber used in the winding coils have self-extinguishing properties, preventing arcs due to short circuits, and the resin does not emit toxic gases under high temperatures.High mechanical strength
High mechanical strengthFilled resin reduces the coefficient of thermal expansion variation within the casting body, minimizes the curing shrinkage rate and internal stress, and results in a high hardness of the cured material. Inside and outside the high and low-voltage coil's epoxy resin encapsulation layer, pre-formed reinforcing materials are placed, creating a dense structure akin to reinforced concrete. Consequently, the mechanical strength is greater than that of pure epoxy resin and can withstand sudden short-circuit electromagnetic forces without damage.
Terms of Use
Installation Height: Altitude not exceeding 2,000 meters.
Power voltage waveform: Similar to a sine wave.
Symmetry of multi-phase power supply voltage:
The power voltage connected to the multi-phase transformer shouldApproximately symmetricalAmbient Temperature: -50℃ to +50℃.
