Product Details
价 格Negotiable
最小起订0 Piece库存0 Piece
Business Card
Negotiable
Negotiable
Negotiable
Negotiable
Japanese Magnescale Magnetic Scal
Negotiable
Mitutoyo SPC-Gage Internal Microm
Negotiable
Mitutoyo Sanyo Three-Jaw Hole Mic
Negotiable
Mitutoyo SAE Internal Micrometer
Negotiable
Japan Magnescale Magnetic Scale S
Negotiable
Japan Magnescale Magnetic Scale S
Negotiable
Mitutoyo's 543-720B Digital Indic
Negotiable
Japan Magnescale Probe Sensor DK8
Negotiable
Japan Magnescale Displacement Sen
Negotiable
Mitutoyo Single-Sphere Wall Thick
Negotiable
Japan Magnescale Caliper Sensor DF812SR
Measurement Range: 5mm, 12mm, 30mm (Custom Products)
Resolution: 0.1 µm
Accuracy: 1 ~ 1.7 µm p-p (varies by model)
High response speed: 80 m/min
Bearings Structure: High durability ball spline bearings used, enhancing sliding performance
High durability: Over 320 million cycles or more (testing continues as of January 2021)
Protection Level: Supports IP67 (for right-angle type, when气管 is installed)
Built-in origin
Available with flanges for secure fixation.
| Main Specifications | ||||
|---|---|---|---|---|
※1 Does not include the inner box and connector parts ※2 Right-angled and using φ4mm tube ※3 Excludes cable components and insert boxes Changes to the content will be made without prior notice. | ||||
| Model | DF812SR，DF812SFR | DF812SLR，DF812SFLR | DF812SVR | |
| Measurement Range | 12mm | |||
| Resolution | 0.1µm | |||
| Accuracy (at 20℃) | 1µm p-p | |||
| Measurement Force (at 20℃) | Up: 0.4 ±0.3 N, 0.6 ±0.5 N (Pneumatic Extrusion Type) Horizontal: 0.5 ±0.3 N 0.7 ±0.5 N (Pneumatic Extrusion Type) Downward: 0.6 ±0.3 N, 0.8 ±0.5 N (Pneumatic Extrusion Type) At a pressure of 0.055 MPa | |||
| Responsive speed | 80m/min | |||
| Origin Position | Spindle movement of 1mm ±0.5mm | |||
| Origin Response Speed | 80m/min | |||
| Output | Serial Communication Protocol | |||
| Spindle Drive Method | Spring Extrusion | Spring Compression/Vacuum Suction | Pneumatic extrusion | |
| Protection Grade ※1 | Linear: IP67; Right-angle: IP64 (IP67 x 2) | |||
| Vibration-resistant | 100m/s2 (20 ～ 2,000 Hz) | |||
| Impact-resistant | 1,000m/s2 (11ms) | |||
| Operating Temperature Range | 0 to +50℃ (No condensation) | |||
| Storage Temperature Range | -20 ~ +60℃ (90%RH max) | |||
| Power Voltage | DC +10 ～ +30 V | |||
| Power Consumption | 12K or less | |||
| Quality ※3 | Approximately 30g | |||
| Probe cable length | 2m | |||
| Output Cable Length | 20' (use the separately sold CE34 series) | |||
| Measurement Head | Spherical ball with super-hard alloy, installed with M2.5 screws | |||
| Accessories | Instruction Manual, Wrench 1pc, Pipe Elbow 1pc (Only for DF8**S*L**) Tighten nut, crank wrench, wave washer, anti-rotation pin, 1 each (only for DF8**S*F**) | |||
Phone Consultation