Product Details
价 格Negotiable
最小起订0 Piece库存0 Piece
Business Card
Negotiable
Negotiable
Negotiable
Negotiable
Mitutoyo Sensitive Short Arm Insi
Negotiable
Japan Magnescale Digital Indicato
Negotiable
Mitutoyo Suruga Short Arm Inside
Negotiable
Japanese Magnescale Magnetic Scal
Negotiable
Japan Magnescale Dial Gauge Senso
Negotiable
Mitutoyo Caliper Card 505-735
Negotiable
Japan Magnescale Magnetic Scale S
Negotiable
Mitutoyo Surftest 511-815-20 with
Negotiable
Japan Magnescale Dial Gauge Senso
Negotiable
Japanese Magnescale Displacement
Negotiable
Japanese Magnescale Displacement Sensor DK812SALR5
Measurement Range: 5mm, 12mm, 30mm
Resolution: 0.1µm, 0.5µm
Accuracy: 1µm p-p to 1.7µm p-p (varies by model)
Response Speed: 80m/min at 0.1µm resolution, 250m/min at 0.5µm resolution
Ball bearing structure: High durability ball spline bearing used, enhancing sliding performance
Swipes: Over 320 million, or more (still undergoing testing as of January 2021)
Protection Rating: Supports IP67 (linear/90-degree type, when气管 is installed)
Built-in origin
Output Signal: A/B phase (pulsed), home position (differential line driver signal with output voltage)
We also offer flanges that can be securely fastened.
| Main Specifications | ||||
|---|---|---|---|---|
※1 Excludes the inner box and connector parts ※2 Right-angle and connects φ4mm pipe ※3 Excludes cable parts and internal inserts Changes to the content will be made without prior notice. | ||||
| Model | High-resolution model | Universal Resolution Type | ||
| DK812SAR DK812SALR DK812SAFR DK812SAFLR DK812SAVR | DK812SBR DK812SBLR DK812SBFR DK812SBFLR DK812SBVR | DK812SAR5 DK812SALR5 DK812SAFR5 DK812SAFLR5 DK812SAVR5 | DK812SBR5 DK812SBLR5 DK812SBFR5 DK812SBFLR5 DK812SBVR5 | |
| Measurement Range | 12mm | |||
| Resolution | 0.1µm | 0.5µm | ||
| Accuracy (at 20℃) | 1µm p-p | 1.5µm p-p | ||
| Measurement Force (at 20℃) | Upward: 0.4 ±0.3 N, 0.6 ±0.5 N (Pneumatic Extrusion Type) Horizontal: 0.5 ± 0.3 N 0.7 ± 0.5 N (Pneumatic Extrusion Type) Downward: 0.6 ± 0.3 N 0.8 ± 0.5 N (Pneumatic Extrusion Type) Pressure: 0.055 MPa | |||
| Large response speed | 80m/min | 42m/min | 250m/min | 100m/min |
| Origin Point | Spindle movement of 1mm ±0.5mm | |||
| Origin Response Speed | With the same response speed as above | |||
| Output | A/B/Origin Differential Line Driver Signal (Compliant with EIA-422) | |||
| Spindle Drive Method | Spring Compression (DK812SAR/SAFR/SBR/SBFR/SAR5/SAFR5/SBR5/SBFR5) Pneumatic Extrusion (DK812SAVR/SBVR/SAVR5/SBVR5) Spring Compression/Vacuum Suction (DK812SALR/SAFLR/SBLR/SBFLR/SALR5/SAFLR5/SBLR5/SBFLR5) | |||
| Protection Grade ※1 | Linear: IP67; Right-angled: IP64 (IP67 ※2) | |||
| Vibration-resistant | 100m/s2 (20 ～ 2,000 Hz) | |||
| Impact-resistant | 1000m/s2 (11ms) | |||
| Operating Temperature Range | 0 ~ +50℃ (No condensation allowed) | |||
| Storage Temperature Range | -20 ~ +60℃ (90%RH or less) | |||
| Power Voltage | DC 5V ±5% | |||
| Power Consumption | 1W | |||
| Quality ※3 | Approximately 30g | |||
| Output Cable Length | 2.5m | |||
| Measurement Head | Super-hard alloy ball, M2.5 installation screw | Steel rod ball surface, installed with M2.5 screws | ||
| Accessories | Instruction Manual, + 2 PM4×5 Screws, Lock Nuts, Wrench, Spring Washer 1 piece of installation pin (only for DK8**S*F**), 1 piece of pipe elbow (only for DK8**S*L**), 1 wrench | |||
Phone Consultation