Product Specifications:
| I. Main Configuration | ||||
| 1 | Controller: | Taiwan Baoyuan System ★ Taiwan Xindai System ★ | ||
| 2 | Three-axis stroke: | 600×500×250(mm) | ||
| 3 | Work Surface: | 500×600 (mm) | ||
| 4 | Spindle Specifications: | 24000旭昌/华雕 Master Spindle★ | ||
| 5 | Fast speed: | X/Y/Z : 10000m m/min | ||
| Standard Configuration | ||||
| 1 | Centralized automatic lubrication system | 6 | Network Transmission Function | |
| 2 | Work Completion Warning Light | 7 | Toolbox and instruction manual | |
| 3 | Electronic Handwheel | |||
| 4 | Cooling System | |||
| 5 | Work Light Lighting | |||
Technical Specifications:
| Model | TXC-650 | |
| X-axis travel | 600㎜ | |
| Y-axis travel | 500㎜ | |
| Z-axis travel | 250㎜ | |
| Lever width | 750 ㎜ | |
| Spindle nose to table surface | 150-400㎜ | |
| Workstation | ||
| Workbench Area | 500×600㎜ | |
| Load Capacity | 250 kg | |
| T-slot width/quantity | 5-18×85 ㎜ | |
| Main shaft | ||
| Spindle Speed | 24000 rpm ★ | |
| Motor | ||
| Spindle Power | 5.5 kw ★ | |
| Three-axis motor power | X/ Y / Z ：850w ★ | |
| Feed Rate | ||
| Cutting Speed | 1-8000 mm/min | |
| Three-axis rapid traverse speed | X/Y/ Z : 10000m m/min | |
| Positioning Accuracy (mm) | 0.004/300 | |
| Repeatability Accuracy (mm) | 0.003 | |
| Other Specifications | ||
| Change刀speed | 5.5 seconds | |
| Mechanical Weight | 2800 kg | |
| Mechanical dimensions | 2000*1850*2550 | |
| Section 3: Standard Accessories Details | ||
| Serial Number | Standard Configuration | Origin/Brand |
| 1 | Control System ★ | Taiwan Power Yuan System / Taiwan Neway System |
| 2 | Operation Panel Unit ★ | Taiwan Po Yuan System / Taiwan Neway System |
| 3 | Three-axis Servo Motor ★ | Yaskawa 850W Servo Drive and Motor |
| 4 | Spindle ★ | Xuchang/Huadiao 5.5KW Main Spindle |
| 5 | C3 precision ball screw | Taiwan Sun Yat-sen/Silver Tai |
| 6 | Three-axis telescopic inner shield | Taiwan Baosheng |
| 7 | Centralized automatic lubrication system | Taiwan Sheng Xiang |
| 8 | Tapered ball bearing import | Germany FAG |
| 9 | Axial coupling | Taiwan TC |
| 10 | Handwheel | Bao Yuan (New Generation) |
| 11 | Relay Board | Schneider (France) |
| 12 | Circuit Breaker | Schneider (France) |
| 13 | Contactor | Schneider (France) |
| 14 | Gas Valve | Yadeke |
| 15 | Filter | Yadeke |
| 16 | Oil and Gas Pipeline | Yadeke |
| 17 | Cutting Cooling Motor | Changzhou Nok |
| 18 | Main shaft oil cooler ★ | Rike |
| 19 | Ethernet cable | |
| 20 | Blowing System | |
| 21 | Toolbox | |
| 22 | Flat-head screwdriver | |
| 23 | Hexagon wrench | |
| 24 | Set of Suction Nozzles ★ | |
| 25 | Pressure plate set ★ | |
| 26 | 6" Flat-Nose Pliers Set ★ | |
| 27 | Large Cross Screwdriver | |
| 28 | Programming Manual | |
| 29 | Operation Manual | |
| 30 | Leveling Adjustment Pads | |
| 31 | Inspection Report | |
Technical Service Requirements:
4.1 Installation and Commissioning: The Seller is responsible for free installation, adjustment of the equipment at the Buyer's site, and free on-site training for the operation and maintenance personnel.
4.2 Technical Support: The Seller provides effective technical support, capable of adjusting machine tool parameters according to the product characteristics required by the Buyer.
4.3 Warranty Period: After the machine tool is accepted, a 12-month free warranty is provided. Parts and services are offered free of charge during the warranty period, with timely and effective service.
4.4 Service Time Commitment: The seller promises that the after-sales service personnel will arrive on-site to handle the machine tool failure repair within 24 hours of receiving the repair report.
4.5 Post-warranty technical support: Within two years after the warranty expires, the seller provides free software technical consulting services. In case of failure in the machine tool's mechanical or system parts, the seller offers free software technical consulting services.
4.6 Post-warranty parts supply: After the warranty period expires, the seller shall provide the buyer with discounted spare parts for repairs on a long-term basis, with the repair parts being offered to the buyer at the seller's cost price for procurement.
Machine Tool Acceptance:
5.1 Acceptance Standards: To be conducted according to technical requirements and parameters.
5.2. Acceptance Procedure:
5.2.1 Upon completion of debugging at the seller's factory, the buyer may conduct a preliminary acceptance inspection. Check geometric and positioning accuracy and process standard specimens to achieve processing accuracy and range. Both parties must sign off on the inspection before shipment.
5.2.2 Inspection results are final upon final acceptance.
Factory documents:
| Serial Number | File Name | Quantity |
| 1 | Machine Accessories List | 1 |
| 2 | Production Quality Inspection Sheet | 1 |
After-sales Service:
1. Warranty for one year from the date of goods delivery for any quality issues with the product itself.
2. If the unit is used, any non-natural damage caused by improper use or modification is not covered by the above warranty, and the user must bear the cost of repair.
