Solvent Recovery Equipment Installation and Commissioning

Shenzhen Kuanbao specializes in the research, development, and sales of explosion-proof solvent recovery machines, widely applicable across various industries such as: waste solvent treatment in the printing industry, industrial painting wastewater treatment, wastewater treatment for precision instruments and hardware manufacturing, recycling and reuse of organic waste solvents, industrial metalworking cleaning, and purification of industrial oils.

Installation and Usage Steps for Kuangbao Solvent Recycling Equipment:

Installation Steps:

First: Secure the machine. Second: Assemble and wire. Third: Connect the power. Please contact our technical staff. Fourth: Install the plastic tube for the solvent outlet. A plastic tube is provided with the machine and placed in the machine's recycling bin. Attach this plastic tube to the solvent flow outlet and tighten the locking ring.

Ensure the steam pipeline is clear of blockages or leaks after equipment installation. Pipeline inspection method: Turn off the main power switch, release the drum cover locking handle, open the drum cover, and blow compressed air at 0.2Bar from the solvent outlet on the outside of the drum into the drum; confirm that air can be smoothly blown out from the solvent outlet pipe on the outside of the drum.

Due to the pre-delivery testing and fine-tuning of the Kunbao solvent recovery machine, once powered on, a check confirms that the fan operates normally (blowing air towards the solvent outlet) and the heater heats up correctly, allowing for normal operation.